General Meeting Summary 7/30/15

From Cuawiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

SWEEPING MAGNET

  • Design: Dipole and 2 plates (field clamp and corrector coil)
  • Fringe fields should be manageable
  • Power supply: requirements much less than SBS (~2000 A) power supply
  • Additional steel required for WACS is part of UK funding proposal. This additional steel can be attached to the side of the magnet
  • Next steps
  • 3D geometry check with HC infrastructure, e.g., vertical clearance, fit on pivot etc. (Charles, designers, ...)
  • Re-do radiation calculations (Hamlet, Rolf, Pavel, TH)


READOUT

  • Working on trigger, summed fADC trigger, single crate configuration to simplify the setup


NPS TEMPERATURE

  • Nominal temperature: 18 degrees with good stabilization (+- 0.5 degrees)
  • Flexible design if need to cool down later


NPS COLLABORATION MEETING

  • Best seems to be adjacent to HC/HA meetings in January 2016


ITEMS FOR NEXT MEETING:


  • Other...


NEXT MEETING: THUR 20 AUGUST, TIME: 9:30 AM (EDT)

Retrieved from "https://wiki.jlab.org/cuawiki/index.php?title=General_Meeting_Summary_7/30/15&oldid=637"