Difference between revisions of "SciGlass prototype 2022"
Line 32: | Line 32: | ||
- For the 5x5 prototype we will need to make 25 HV dividers | - For the 5x5 prototype we will need to make 25 HV dividers | ||
− | - LEMO | + | - LEMO connectors (FFS.00.250.NTCE52) |
+ | https://www.digikey.com/en/products/detail/lemo/FFS-00-250-NTCE52/3597392?s=N4IgTCBcDaIGJwMoDoAMrlgKwYHIBUBhAUSwgF0BfIA | ||
− | - HV connectors | + | - LEMO bulkhead connectors (PES.00.250.NTME31) |
+ | https://www.digikey.com/en/products/detail/lemo/PES-00-250-NTME31/3806969 | ||
+ | |||
+ | - HV connectors (Pasternack SHV connector PE45556) | ||
+ | https://www.pasternack.com/shv-jack-rg174-rg316-rg188-connector-pe45556-p.aspx | ||
- HV divider circuit boards + sockets | - HV divider circuit boards + sockets | ||
Line 43: | Line 48: | ||
- Label Machine | - Label Machine | ||
− | + | https://www.amazon.com/LABELWORKS-LW-PX300-Industrial-Label-Maker/dp/B08JQMFZ6F/ref=sr_1_29_sspa?crid=3BQBGDXQ8A5TJ&keywords=label+machine&qid=1667313715&qu=eyJxc2MiOiI1Ljg1IiwicXNhIjoiNS40MCIsInFzcCI6IjQuOTQifQ%3D%3D&sprefix=label+machine%2Caps%2C103&sr=8-29-spons&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc&psc=1 | |
- Black RTV silicone | - Black RTV silicone | ||
− | - Black | + | - Black tape (0.68") |
+ | https://www.amazon.com/Wapodeai-Electrical-Temperature-Resistance-Waterproof/dp/B07ZWC2VLX/ref=sr_1_3_mod_primary_new?crid=3OYTWXT7MLYA5&keywords=black+tape+2.00%22%2C+101.60+mm&qid=1667313468&qu=eyJxc2MiOiIxLjU3IiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=black+tape+2.00+%2C+101.60+mm%2Caps%2C103&sr=8-3 | ||
- Filament to print the box for 5x5 (PLA, 1.75mm) | - Filament to print the box for 5x5 (PLA, 1.75mm) | ||
+ | https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_Polymaker-2DPolyLite-2DPrinter-2DFilament-2DPrinting_dp_B07PHTMZQT_ref-3Dsr-5F1-5F16-3Fcrid-3D1C2ROXS10LFTO-26keywords-3Dfilament-2Bblack-2Bpla-2Beconomy-2Bcolor-2Bfabb-2B1.75-2Bmm-2B3kg-26qid-3D1667224863-26qu-3DeyJxc2MiOiItMC4wMSIsInFzYSI6IjAuMDAiLCJxc3AiOiIwLjAwIn0-253D-26sprefix-3Dfilament-2Bblack-2Bpla-2Beconomy-2Bcolor-2Bfabb-2B1.75-2Bmm-2B3kg-252Caps-252C62-26sr-3D8-2D16&d=DwIFaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=AX1P8R1V2r7WiE668wm4tw&m=0aCOb46vMHF1ovfzsOKqrD8Jasu60HNHwqSVkBfRbVvUltEXBl9RYKZcBxkhWBCC&s=B-wtwHSrzaJPxw1q0_FwVTcgr2Kr2zybqLhuZOBQVkE&e= | ||
===Construction of the 3x3prototype (40cm SciGlass 2022) === | ===Construction of the 3x3prototype (40cm SciGlass 2022) === |
Revision as of 10:50, 1 November 2022
<-- Back to Beam Tests Main Page
People
- CUA: Tanja Horn (superviser), Yeranuhi Ghandilyan, Joshua Crafts, VSL Team
- JLab: Vladimir Berdnikov, Sasha Somov
- AANL: Hakob Voskanyan, Arthur Mkrtchyan, Hamlet Mkrtchyan, Vardan Tadevosyan, ...
- INFN: Marco Battaglieri, ...
Meetings
Physical characteristics of the glass
Physics
Visual inspection of the SciGlass modules
Dimensions
- 2022 Generation SciGlass 40cm: Dimensions of 9 blocks produced in summer 2022 (CUA-1....CUA-9
Transmission
- 2022 Generation SciGlass 40cm: Comparison of 9 blocks produced in summer 2022
cosmic test
Engineering part and design of the 3x3 prototype (40xm SciGlass 2022)
Hardware
Read out
- For the test we will need 25 cables (+3,4 spare)
- For the 5x5 prototype we will need to make 25 HV dividers
- LEMO connectors (FFS.00.250.NTCE52) https://www.digikey.com/en/products/detail/lemo/FFS-00-250-NTCE52/3597392?s=N4IgTCBcDaIGJwMoDoAMrlgKwYHIBUBhAUSwgF0BfIA
- LEMO bulkhead connectors (PES.00.250.NTME31) https://www.digikey.com/en/products/detail/lemo/PES-00-250-NTME31/3806969
- HV connectors (Pasternack SHV connector PE45556) https://www.pasternack.com/shv-jack-rg174-rg316-rg188-connector-pe45556-p.aspx
- HV divider circuit boards + sockets
- Cables for dividers
Technical
- Label Machine https://www.amazon.com/LABELWORKS-LW-PX300-Industrial-Label-Maker/dp/B08JQMFZ6F/ref=sr_1_29_sspa?crid=3BQBGDXQ8A5TJ&keywords=label+machine&qid=1667313715&qu=eyJxc2MiOiI1Ljg1IiwicXNhIjoiNS40MCIsInFzcCI6IjQuOTQifQ%3D%3D&sprefix=label+machine%2Caps%2C103&sr=8-29-spons&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc&psc=1 - Black RTV silicone
Construction of the 3x3prototype (40cm SciGlass 2022)
Installation of the 3x3 prototype (40cm SciGlass 2022) in the beam line (HallD) at Jefferson Lab
Beam alignment and re-alignment
Data from Prototype tests
Detailed List of Activities
Date?? - Visual inspection of the SciGlass "(Josh)"
09/16/2022 - Transmittance measurement (Josh, Yeran)
09/29/2022 - Dimensions measurement (Josh, Yeran)
09/29/2022 - Beam test with 12x1 array in the Hall, (Vlad, Arshak)
10/06/2022 - 12x1 array removing from the hall (Yeran, Arshak)
10/11/2022 - 3x3 prototype cosmic test in clean room, (Yeran, Arshak)
10/13/2022 - 3x3 prototype box assembling (Josh, Yeran)
10/14/2022 - 3x3 prototype installation in the hall and alignment (Yeran, Vlad, Arshak, Sasha)
10/18/2022 - 3x3 prototype re-alignment (5mm), (Yeran, Arshak, Sasha)
10/19/2022 - 3x3 prototype re-re-alignment (5+3mm), (Vlad, Arshak)
10/27/2022 - 3x3 prototype HV base replacement "(Yeran, Arthur, Arshak)" https://userweb.jlab.org/~yeran/SciGlass/3x3-HV.pdf
10/28/2022 - 3x3 prototype central channel's (#5) HV divider/base replacement "(Yeran, Arshak)" https://userweb.jlab.org/~yeran/SciGlass/3x3-HV-updated.pdf
Future Plans
Most probably on Thursday (October 27 2022) will be an access to the Hall-D. We are planning to change the HV dividers (to those with no pre-amplifier) and increase HV (from 1000 V to 1100 V) on the 3x3 prototype in order to improve the photodetection efficiency. Everything is ready to go to the Hall. Since there is no paper-based instruction for all this procedure, I'll try to make one for the future tests. https://userweb.jlab.org/~yeran/SciGlass/Towers+5mm+3mm.pdf