Difference between revisions of "HPS 2016 Trigger Commissioning"
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
#** 200 nA | #** 200 nA | ||
# 20 kHz Pulser Runs | # 20 kHz Pulser Runs | ||
| − | #* trigger file: '''HPS/Run2016/pulser20kHz.trg''' | + | #* trigger file: '''<tt>HPS/Run2016/pulser20kHz.trg</tt>''' |
#* At least 100 Million events (~1 hour) at each beam current: | #* At least 100 Million events (~1 hour) at each beam current: | ||
#** 25 nA (or lower) | #** 25 nA (or lower) | ||
Revision as of 01:16, 6 February 2016
Phase 0: Diagnostics
- One Run with Singles & Pairs Triggers
- trigger file: HPS/Run2016/v0.trg
- 30 minutes at any current
Phase 1: Preliminary Tuning
- ECal Pedestal Runs
- About 10 minutes at each beam current:
- 25 nA (or lower)
- 100 nA
- 200 nA
- About 10 minutes at each beam current:
- 20 kHz Pulser Runs
- trigger file: HPS/Run2016/pulser20kHz.trg
- At least 100 Million events (~1 hour) at each beam current:
- 25 nA (or lower)
- 100 nA
- 200 nA
Ideally the pedestal runs should be done first so that they can be used
to update the pedestals used for the 20 kHz Pulser runs. This requires
an ECal expert available, and to then update the trigger files for the
subsequent Pulser runs. If this is not the case, the Pulser runs can be
done first with the preconfigured pedestals.
Phase 2: Final Tuning
coming soon