HPS DAQ Reboot Procedure

From hps run
Revision as of 12:49, 25 March 2016 by Baltzell (Talk | contribs)

Jump to: navigation, search

1. From the main HPS_EPICS screen, click DAQ Status to open the rebooting screen.

Hps epics top.png

2. From there click Reboot Full DAQ and the popup confirmation.

Hps epics fulldaqreboot.png Hps epics fulldaqreboot confirm.png

3. This will open a terminal. It may ask for clasrun's password, in which case you enter it.

Hps daq reboot 1.png

4. After rebooting the T-DAQ, press enter to proceed rebooting the SVT-DAQ:

Hps epics svtdaqreboot confirm.png

5a. If during the SVT stages, it hangs more than a few seconds, abort with ctrl-C as instructed:

Hps epics svtdaqreboot hang.png

5b. And then click the Reboot SVT DAQ button.

Hps epics svtdaqreboot.png