HPS DAQ Reboot Procedure

From hps run
Revision as of 12:47, 25 March 2016 by Baltzell (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

1. From the main HPS_EPICS screen, click DAQ Status' to open the rebooting screen.

Hps epics top.png

2. From there click "Full DAQ Reboot" and the popup confirmation.

Hps epics fulldaqreboot.png Hps epics fulldaqreboot confirm.png

3. This will open a terminal. It may ask for clasrun's password, in which case you enter it.

Hps daq reboot 1.png

4. After rebooting the T-DAQ, press enter to proceed rebooting the SVT-DAQ:

Hps epics svtdaqreboot confirm.png

5a. If during the SVT stages, it hangs more than a few seconds, abort with ctrl-C as instructed:

Hps epics svtdaqreboot hang.png

5b. And then click the SVT DAQ Reboot Button.

Hps epics svtdaqreboot.png



Retrieved from "https://wiki.jlab.org/hps-run/index.php?title=HPS_DAQ_Reboot_Procedure&oldid=1394"