HPS DAQ Reboot Procedure
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
1. From the main HPS_EPICS screen, click DAQ Status to open the rebooting screen.
2. From there click Reboot Full DAQ and the popup confirmation.
3. This will open a terminal. It may ask for clasrun's password, in which case you enter it.
4. After rebooting the T-DAQ, press enter to proceed rebooting the SVT-DAQ (and enter clasrun's password if requested):
4a. If during the SVT stages, it hangs more than a few seconds, abort with ctrl-C as instructed by the messages in the terminal, and then click "Reboot SVT DAQ" button:
=== 6. Restart runcontrol (it should have been killed automatically during the previous steps) in the appropriate vncviewer. There should be a terminal open where runcontrol was last restarted, in which case you can press up to get it from the shell history and run it. Otherwise, as user=clasrun on clondaq3, execute: runcontrol -rocs -log