Difference between revisions of "Chiller and Temperature Sensors"
From Pcrewiki
Jump to navigationJump to search| Line 6: | Line 6: | ||
We connected the 5V power to the sensors and obtained correct readouts. | We connected the 5V power to the sensors and obtained correct readouts. | ||
The sensor 24, 28 are not working | The sensor 24, 28 are not working | ||
| − | [[File:Temperature_readings]] | + | [[File:Temperature_readings.png]] |
The program we used is at C:\Program Files\National Instruments\LabVIEW | The program we used is at C:\Program Files\National Instruments\LabVIEW | ||
Revision as of 11:11, 24 July 2014
July 23, 2014
We followed the steps at http://www.jlab.org/primex/subsystems/tempmon/Hooking_Up_TempMon.txt
We connected the 5V power to the sensors and obtained correct readouts.
The sensor 24, 28 are not working
The program we used is at C:\Program Files\National Instruments\LabVIEW 6\_DAQ VIs\2004-06 System Monitoring.llb (account primrun on the Windows machine close to the DAQ electronics)
We did not get the humidity readings from the hygrometer (Moisture Monitor Series 3 from GE)
