Howto access remote scopes

Back to Tritium-Main Back to How to Back to Third Person

Direct link to the entire repository of information.

LHRS scopes

• A 4-chan scope and a 2-chan scope is installed. Both scopes are from Tektronix.
• The IP address of the 4-chan scope is 129.57.192.253.
• The IP address of the 2-chan scope is 129.57.192.128 .
• Both scopes are accessible in observer mode if you type in the IP address in the browser.
• To access them in control mode, one has to open /escope/index.html in the adaq home folder with a browser.
• The following inputs are plugged into the 4-chan scope for (e,'K) (10/30/18):

Channel	Signal
1	S0
2	S2
3	S0&S2
4	GC

• The following inputs are plugged into the 2-chan scope for (e'K) (10/30/18):

Channel	Signal
1	empty
2	empty
ext	empty

• For the power remote control the 4-chan scope is plugged in hareboot2 channel 6 and the 2-chan scope is plugged in hareboot2 channel 8.

RHRS scopes

• A 4-chan scope with remote connection is installed. It is a MSO-X-3024A from Agilent.
• The IP address of the 4-chan scope is 129.57.164.227.
• To access the scope type in the IP address in a browser (It doesn't currently work from the adaq2 computer!). Click on "Browser Web Control" in the web page and choose "Table Remote Front Panel" afterwards.

Alternatively, you can use vncviewer via the command "vncviewer 129.57.164.227:0".

• Single Arm Setup: The following inputs are plugged into the 4-chan scope for (e,e') SRC (10/10/18):

Channel	Signal
1	T4
2	T5
3	empty (channel broken)
4	T6

• Coincidence arm setup: The following inputs are plugged into the 4-chan scope for (e,'K) (10/30/18):

Channel	Signal	Length of connection cable
1	S0 coinc	8ns from FIFO
2	S2 coinc	8ns from FIFO (triggered)
3	empty (broken channel)
4	S0&S2/T4 logic	8ns from Anti-OUT

• The connections of T4-T6 are from the Trigger Logic. Therefore, T6 is shifted by an extra of 16ns at the NIM-ECL trigger input.
• For the power remote control the 4-chan scope is plugged in hareboot32 channel 4

On January 12th 2018 a second 4-chan remote scope was installed (Textronix 3054B)

• The IP address of this 4-chan scope is 129.57.164.45 or hascope4.
• This scope is accessible in observer mode if you type in the IP address in the browser.
• To access it in control mode, one has to open /escope/index.html in the adaq home folder with a browser.
• Single arm setup: The following inputs are plugged into the 4-chan scope (09/29/18):

Channel	Signal	Length of connection cable
1	S0	8ns
2	S2	8ns
3	S0 & S2 (triggered)	8ns
4	GC	8ns

• Coincidence arm setup: The following inputs are plugged into the 4-chan scope (e'K) (10/30/18):

Channel	Signal	Length of connection cable
1	C1	8ns from C1 logic (triggered)
2	T1	8ns from FIFO
3	T4	8ns from T4 disc/coinc (Anti-OUT)
4	C2	8ns from C2 logic

• The connections of channel 2-3 are before the coincidence trigger logic.
• For the power remote control the 4-chan scope is plugged in hareboot32 channel 5