Difference between revisions of "Development Period - February 9-10"

Revision as of 18:57, 9 February 2015

Listed in order of suggested priority...

Re-measure emittance in order to analyze Run 1 conditions (3 hours)

February 9, 2015:

Identified parameters and details for a procedure
Measured emittance and Twiss for 6.3 MeV/c setup
Started emittance and Twiss for 5.5 MeV/c but harp is stuck so test deferred for now

Test hardware TOF veto at 31MHz (4 hours)

Runs 8210 - 8217 with 0.25 um gold foil

Test FADC without TDC (1 hour)

February 4, 2015:

Added two more laser timing signals to FADC. From Disc 708, OUT signal was connected to FADC Ch10 and OUT_bar was connected to Ch12. The original laser timing signal is still connected to Ch9.

Test background as a function of target ladder position on large target foil (2 hours)

Test Mott delayed operation (1 hour): a set of 10 runs while changing between No Delay and Delay=8

Test new Mott DAQ Configurations (1 hour)

SemiIntFast (only readout of fADC250. Blocklevel = 1) and SemiIntBlock (only readout of fADC250. Blocklevel = 50). Measure deadtime with 5 uA on 1 um gold foil.

@@ Line 3: / Line 3: @@
 ==Re-measure emittance in order to analyze Run 1 conditions (3 hours)==
-:* '''February 4, 2015:'''
+:* '''February 9, 2015:'''
 ::* Identified parameters and details for a procedure
 ::* Measured emittance and Twiss for 6.3 MeV/c setup
 ::* Started emittance and Twiss for 5.5 MeV/c but harp is stuck so test deferred for now
-==Test hardware TOF veto at 31MHz and 62MHz (6 hours)==
+==Test hardware TOF veto at 31MHz (4 hours)==
+:* ''' Runs 8210 - 8217 with 0.25 um gold foil'''
 ==Test FADC without TDC (1 hour)==