Difference between revisions of "Anode"

Revision as of 08:56, 8 July 2021

Ask Joe is the anode tube needs to be biased, or if it can be at ground potential
Discuss with Marcy and ME new anode tube design with significantly more open area for improved pumping. This new design will have to be checked in GPT beam dynamics simualtions. Make drawing, fabricate, UHV clean
Work with Phil and Danny on comparing anode drawing with support frame (spider) and the rest of the anode assembly parts.
Evaluate amount of anode shift allowed by the existing design/assembly
Perform CST, GPT simulations for guidance on anode shift to compensate beam kick at 200 keV. Based on those, determine if anode assembly/design has sufficient slop
Once SS&A fiducial the HV chamber, check if the anode needs to be shifted to compensate for any top flange (cathode) misalignment
The anode has some scratches, it needs re-polishing
ceramic washers are broken, need more washers but depends if tube needs to be biased or not
Dry fit anode components with new tube and ensure the anode and check anode can be shifted per GPT simulations guidelines
UHV clean all components
Final assembly prior to installation in HV chamber

@@ Line 6: / Line 6: @@
 * Once SS&A fiducial the HV chamber, check if the anode needs to be shifted to compensate for any top flange (cathode) misalignment
 * The anode has some scratches, it needs re-polishing
+* ceramic washers are broken, need more washers but depends if tube needs to be biased or not
 * Dry fit anode components with new tube and ensure the anode and check anode can be shifted per GPT simulations guidelines
 * UHV clean all components