Difference between revisions of "GTS meeting 10 27 15"
Jump to navigation
Jump to search
(Created page with "* Figuring out top heater length. If we use the 70 mm stroke, the heater length including its flange is 14 inches. This will allow the heater to lower 0.5 inches below the cha...") |
|||
| Line 1: | Line 1: | ||
* Figuring out top heater length. If we use the 70 mm stroke, the heater length including its flange is 14 inches. This will allow the heater to lower 0.5 inches below the chamber center line, and with the 70 m stroke, the heater will clear the manipulator for the puck. | * Figuring out top heater length. If we use the 70 mm stroke, the heater length including its flange is 14 inches. This will allow the heater to lower 0.5 inches below the chamber center line, and with the 70 m stroke, the heater will clear the manipulator for the puck. | ||
| − | *[[File:Figuring out top heater length. | + | *[[File:Figuring out top heater length.pdf]] |
Revision as of 13:30, 26 October 2015
- Figuring out top heater length. If we use the 70 mm stroke, the heater length including its flange is 14 inches. This will allow the heater to lower 0.5 inches below the chamber center line, and with the 70 m stroke, the heater will clear the manipulator for the puck.
- File:Figuring out top heater length.pdf