Kerr - June 24, 2016

Here is power related to distance of magnets. Where 0 is the foil surface.

This graph seems quite interesting. We achieved a total rotation of .11 degrees with one polarity and .15 deg with the opposite.

Here is Field strength versus power.

An aerial view of the setup so far

The most recent, and hopefully last, modification to the magnet holding apparatus. The Micrometer has a range of 25 mm.

The reason we aren's seeing a "V" shape in our B field vs Power graphs is most likely because we are not at the absolute minimum power, or rather the cross polarizers are not completely orthogonal with one another. In one direction of rotation we are allowing the light to be more perpendicularly polarized with the analyzer therefore decreasing the amount of light coming through. In the other direction we move farther away from a perpendicular crossing allowing more light to pass through.

We do however, see an almost exponential increase in power. The increase and decrease of power is a very good sign and indicates a few things: I was skeptical at first of the plate being entirely still since the magnets are so powerful. But as we reverse the polarity the plate is still being pulled on. So as the amount of power increases with one polarity it could be explained that the light amount is increasing from the bending of the plate. However, when the light amount decreases and the plate is still being pulled on although its' increase may be slowed by a bending of the plate it is not hindered and the decrease of light must be explained by something and we have reason to believe that that something is the Kerr effect. The slightly exponential increase of light may be from the bending of the plate by the magnets.

Original excel file with this data set: Media:Pickoffdatagreen.xlsx