Kerr - August 5, 2016

Use this to interpret Excel descriptions.

1. NEAR Trials with Steel only

The following 'a.' and 'b.' describes measurements done with;

• STEEL puck only, {with the exception of a mirror null}
• Angle between laser and photodiode 38.6 -+2.4 degrees
• The Setup was "NEAR" The solenoid
• Center of Optics Stage {between Laser and Photodiode} 58 -+ 1 cm from puck

a. -->->->media:NearSetup.xlsx

Then Puck stability was investigated

b. -->->-> media:Puckchanges.xlsx

2. FAR trials with STEEL and Moly

The following file describes measurements done with;

• STEEL and MOLY and a Mirro
• Angle between laser and photodiode 5.31 -+0.45 degrees
• The Setup was "FAR" from The solenoid
• Photodiode 140 cm -+ 2 cm from puck