Difference between revisions of "GTS meeting 3 21 17"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
* Conditioned Gun at 300 kV with solenoid at 0 to 300 A, left to do it at: 325, 350, 375, and 400 A. Two currents, 350 and 400 A, we attempted before but we will repeat. | * Conditioned Gun at 300 kV with solenoid at 0 to 300 A, left to do it at: 325, 350, 375, and 400 A. Two currents, 350 and 400 A, we attempted before but we will repeat. | ||
| + | |||
| + | * MCRGT01 corrector was firmly fixed to beamline using Al holders. | ||
* Plan for next week (March 27, 2017): | * Plan for next week (March 27, 2017): | ||
| Line 8: | Line 10: | ||
# Thursday and Friday open all day for beamline bake. Turn ON the extractor gauge in Gun HV Chamber. Use GN2 heater to send 250 C hot gas through the water lines of the FCup to degas. | # Thursday and Friday open all day for beamline bake. Turn ON the extractor gauge in Gun HV Chamber. Use GN2 heater to send 250 C hot gas through the water lines of the FCup to degas. | ||
| − | * | + | * What we are working on now: |
| + | # Still trying to center the gun solenoid | ||
| + | # Do we want to keep the anode biased at +280 V all times (and while running beam)? | ||
Revision as of 08:20, 21 March 2017
- With both solenoids at +2.0 Amps, the solenoid field direction is pointing downstream along the beam path. The field of the magnetized gun solenoid is pointing out of the photocathode into the downstream direction.
- Conditioned Gun at 300 kV with solenoid at 0 to 300 A, left to do it at: 325, 350, 375, and 400 A. Two currents, 350 and 400 A, we attempted before but we will repeat.
- MCRGT01 corrector was firmly fixed to beamline using Al holders.
- Plan for next week (March 27, 2017):
- Monday, Tuesday and Wednesday: open in morning to install beamline but close in afternoon to run beam
- Thursday and Friday open all day for beamline bake. Turn ON the extractor gauge in Gun HV Chamber. Use GN2 heater to send 250 C hot gas through the water lines of the FCup to degas.
- What we are working on now:
- Still trying to center the gun solenoid
- Do we want to keep the anode biased at +280 V all times (and while running beam)?