Difference between revisions of "Kerr - July 29, 2016"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
*foil surface diameter across is 11 mm +-.5 mm | *foil surface diameter across is 11 mm +-.5 mm | ||
*Laser dot diameter through polarizer to foil surface is 2mm +-.5 mm | *Laser dot diameter through polarizer to foil surface is 2mm +-.5 mm | ||
| + | |||
| + | '''Excel Sheets for MMF data taken''' | ||
| + | First, Data taken with original setup. Stage untouched since the 28th. Before stage was realigned in an attempt to be parallel with foil | ||
| + | *two measurements were taken | ||
| + | *Center was approximately 10.75 mm (on micrometer) | ||
| + | * at 9.3 mm (on micrometer) a tad left of center | ||
| + | ** [[media:preadj9.3mm.xlsx]] | ||
| + | * at 7.0 mm (on micrometer) | ||
| + | ** [[media:preadj7.0mm.xlsx]] | ||
Revision as of 23:27, 29 July 2016
Magnetic Measurement Facility readings of pucks, Steel () and Molybdenum --> media:LDGT01 Puck Measurements for MOKE 16-7-28.xlsx
Important INFO to note
- foil surface diameter across is 11 mm +-.5 mm
- Laser dot diameter through polarizer to foil surface is 2mm +-.5 mm
Excel Sheets for MMF data taken First, Data taken with original setup. Stage untouched since the 28th. Before stage was realigned in an attempt to be parallel with foil
- two measurements were taken
- Center was approximately 10.75 mm (on micrometer)
- at 9.3 mm (on micrometer) a tad left of center
- at 7.0 mm (on micrometer)