Difference between revisions of "March 24, 2017 - 200kV gun upgrade meeting"
Jump to navigation
Jump to search
| (14 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | == New action items == | |
| − | + | ===Electrode/insulator design/fabrication=== | |
| − | + | *Danny/Gabriel/Carlos will iterate on final design : minimize gap over triple point, optimize ceramic/metal gap curvature | |
| − | : Build electrode/shed from one piece of material 8" cube, not enough Nb, go w/ SS | + | Finalize electrostatic design [[media:170324_FinalDesign.pptx]] |
| − | + | Finalize ME design [[media:JL0045108---dwg1.pdf]] | |
| + | *Build electrode/shed from one piece of material 8" cube, not enough Nb, go w/ SS. Matt will check on 316LN vacuum melt, but let's still check what shop used for 350kV ball electrodes, maybe save time and money | ||
From Carlos: I stopped by the machine shop and Casey confirms that they have in stock 316L (low Carbon) for the electrodes. I showed him the picture of the GTS/UITF shed and he says the material is not hard to come buy, not sure if it comes form same vendor but material should have very similar properties. This is what he replied: The following message was sent to: Carlos Hernandez-Garcia from the staff search page. I have 316L for your projects. | From Carlos: I stopped by the machine shop and Casey confirms that they have in stock 316L (low Carbon) for the electrodes. I showed him the picture of the GTS/UITF shed and he says the material is not hard to come buy, not sure if it comes form same vendor but material should have very similar properties. This is what he replied: The following message was sent to: Carlos Hernandez-Garcia from the staff search page. I have 316L for your projects. | ||
| − | + | *Reuse springs/rollers/cage, but new rear support ring optimized for electrode | |
| − | |||
qty 6 roller springs. [[media:32709-02221_C_1of1.pdf]] | qty 6 roller springs. [[media:32709-02221_C_1of1.pdf]] | ||
qty 6 roller pins. [[media:ACC2003000-0317.pdf]] | qty 6 roller pins. [[media:ACC2003000-0317.pdf]] | ||
qty 1 key [[media:ACC2003000-0315.pdf]] | qty 1 key [[media:ACC2003000-0315.pdf]] | ||
| − | + | *Collect as-found on white insulator assembly and black insulator | |
ILC Nb Gun2 white ceramic design [[media:WHITECERAMICQA.pdf]] | ILC Nb Gun2 white ceramic design [[media:WHITECERAMICQA.pdf]] | ||
Surveys on Monday | Surveys on Monday | ||
| − | |||
| − | |||
| − | + | ===Vacuum chamber/considerations=== | |
| − | + | *Plan A | |
| − | + | Use as-is, but identify/repair short of NEG isolation, retain leak valve but add right angle for isolation. Do we forego NEG isolation and remove unnecessary ceramic plates (fallen to bottom of chamber) | |
| − | + | * Plan B | |
| + | Rotate NEG's => remove NEG's, weld support rods, NEG coat chamber, return X number of NEGs, new ground screen, retain leak valve w/ right angle valve | ||
| + | *Plan is to vacuum fire electrode 900C, barrel polish before attaching to ceramic | ||
| − | + | ===Gun2 NEG Tube=== | |
| − | + | *Document Gun2 as-found. Give Danny sketch of sequence for new tube w/ BPM's + magnets, eliminate/shorten downstream bellows | |
| − | + | [https://logbooks.jlab.org/entry/3468102 Logbook pic/layout of the existing Gun2 NEG] | |
| − | + | *Find materials for new Gun2 NEG tube | |
| − | + | Found/leak checked two large aperture BPM cans [[Media:Gun2_IMG_5144.JPG]] | |
| + | All assembled FH solenoids spoken for; take from Gun3, maybe spare parts, or fabricate new coils | ||
| − | + | ===Gun3 Removal=== | |
| − | + | *Retain downstream chamber w/ extractor, RGA, GP-100 w/o NF3/Cs, and remove gun table and HV section | |
| − | + | [https://logbooks.jlab.org/entry/3468102 As-found of existing Gun3] | |
| − | |||
| − | + | *Eliminating Gun Switch software Gun3 | |
| − | Hello Joe, I'm coordinating with Scott to rewrite the gun switch software for one gun operations. Looks like we are going to gut most of additional gun code simplifying the solution we currently have. For the front end, I wanted to meet with you to get an idea of what things you're looking for on the screen. I'll be on shift next week Monday - Wednesday from 2-10 to support the injector work. Hopefully we can talk then. Best Kyle | + | Hello Joe, I'm coordinating with Scott to rewrite the gun switch software for one gun operations. Looks like we are going to gut most of additional gun code simplifying the solution we currently have. For the front end, I wanted to meet with you to get an idea of what things you're looking for on the screen. I'll be on shift next week Monday - Wednesday from 2-10 to support the injector work. Hopefully we can talk then. Best Kyle. |
| − | + | ===Spellman HVPS update=== | |
| − | + | Now there are two ... one for Mike Johnson EPICS development, one for HV chamber testing using Spellman GUI. [[Media:Gun2_IMG_5153.JPG]] | |
| − | + | ||
| + | ===Radmon update=== | ||
Latest revision as of 10:48, 24 March 2017
New action items
Electrode/insulator design/fabrication
- Danny/Gabriel/Carlos will iterate on final design : minimize gap over triple point, optimize ceramic/metal gap curvature
Finalize electrostatic design media:170324_FinalDesign.pptx Finalize ME design media:JL0045108---dwg1.pdf
- Build electrode/shed from one piece of material 8" cube, not enough Nb, go w/ SS. Matt will check on 316LN vacuum melt, but let's still check what shop used for 350kV ball electrodes, maybe save time and money
From Carlos: I stopped by the machine shop and Casey confirms that they have in stock 316L (low Carbon) for the electrodes. I showed him the picture of the GTS/UITF shed and he says the material is not hard to come buy, not sure if it comes form same vendor but material should have very similar properties. This is what he replied: The following message was sent to: Carlos Hernandez-Garcia from the staff search page. I have 316L for your projects.
- Reuse springs/rollers/cage, but new rear support ring optimized for electrode
qty 6 roller springs. media:32709-02221_C_1of1.pdf qty 6 roller pins. media:ACC2003000-0317.pdf qty 1 key media:ACC2003000-0315.pdf
- Collect as-found on white insulator assembly and black insulator
ILC Nb Gun2 white ceramic design media:WHITECERAMICQA.pdf Surveys on Monday
Vacuum chamber/considerations
- Plan A
Use as-is, but identify/repair short of NEG isolation, retain leak valve but add right angle for isolation. Do we forego NEG isolation and remove unnecessary ceramic plates (fallen to bottom of chamber)
- Plan B
Rotate NEG's => remove NEG's, weld support rods, NEG coat chamber, return X number of NEGs, new ground screen, retain leak valve w/ right angle valve
- Plan is to vacuum fire electrode 900C, barrel polish before attaching to ceramic
Gun2 NEG Tube
- Document Gun2 as-found. Give Danny sketch of sequence for new tube w/ BPM's + magnets, eliminate/shorten downstream bellows
Logbook pic/layout of the existing Gun2 NEG
- Find materials for new Gun2 NEG tube
Found/leak checked two large aperture BPM cans Media:Gun2_IMG_5144.JPG All assembled FH solenoids spoken for; take from Gun3, maybe spare parts, or fabricate new coils
Gun3 Removal
- Retain downstream chamber w/ extractor, RGA, GP-100 w/o NF3/Cs, and remove gun table and HV section
As-found of existing Gun3
- Eliminating Gun Switch software Gun3
Hello Joe, I'm coordinating with Scott to rewrite the gun switch software for one gun operations. Looks like we are going to gut most of additional gun code simplifying the solution we currently have. For the front end, I wanted to meet with you to get an idea of what things you're looking for on the screen. I'll be on shift next week Monday - Wednesday from 2-10 to support the injector work. Hopefully we can talk then. Best Kyle.
Spellman HVPS update
Now there are two ... one for Mike Johnson EPICS development, one for HV chamber testing using Spellman GUI. Media:Gun2_IMG_5153.JPG
