Difference between revisions of "EJFAT Group Meeting Mar. 3, 2022"

Latest revision as of 17:08, 3 March 2022

The meeting time is 11:00am.

Connection Info:

You can connect using ZoomGov Video conferencing (ID: 161 012 5238). (Click "Expand" to the right for details -->):

Meeting URL
 https://jlab-org.zoomgov.com/j/1610125238?pwd=QnEvcjV6VFFndWZsQW15SmJKU0RJZz09&from=addon

Meeting ID
161 012 5238

Passcode
503371

Want to dial in from a phone?

Dial one of the following numbers:
US: +1 669 254 5252 or +1 646 828 7666 or +1 551 285 1373 or +1 669 216 1590 or 833 568 8864 (Toll Free)

Enter the meeting ID and passcode followed by #

Connecting from a room system?
Dial: bjn.vc or 199.48.152.152 and enter your meeting ID & passcode

Agenda:

Previous meeting
Situation:
- Testing with ERSAP on FPGA LB
- Using script based LB Control Plane
- Awaiting Compute Equip.- ETA 1 June
- Awaiting Networking Equip. - ETA 1 July
- End-to-end EJFAT ERSAP solution
- Building Interim Test Lab
  - Use FPGA port #1 for local host subnet testing
  - Use FPGA port #2 for switch fabric testing
  - Use (2) spare/borrowed switches
  - Using spare 8 nodes (Abbott)
  - Using Hall-D spare 10Gbs NICs
  - Diagram
Pending:
- ~~Minor f/w change for 'garbage' packets~~
- Support C libraries for LB Host Control Plane
- ESnet smartnic open-source GitHub repo (April)
- ESnet private, forkable Jlab P4 and simulations GitHub repo (April)
To Do:
- Connect
  - FPGA port #2 to switch
  - Mellanox NIC port #2 to switch
  - Switch config for FPGA
- CentOS 7 install on interim boxes - next week
- C-based control plane
  - Feedback from Compute hosts design
  - Control Plane Arp cache / network good citizen - P4 may do
- Control Plane daemon for compute host
- Jumbo Frames
- IPV6 testing
- EJFAT Subnet
- Performance Measures (RT2022 - April 01 submission):
  - Stress Test ERSAP / EJFAT
  - Payload Size
  - Reassembly
  - Multiple Back-Ends
  - AOT
Test Plan
AOT

@@ Line 40: / Line 40: @@
 ** Awaiting Compute Equip.- ETA 1 June
 ** Awaiting Networking Equip. - ETA 1 July
-** <s>End-to-end EJFAT ERSAP solution</s>
+** End-to-end EJFAT ERSAP solution
-** Pursuing Jumbo Frames - currently limited to 1472B frames - fix is in / not yet installed
 ** Building Interim Test Lab
 *** Use FPGA port #1 for local host subnet testing
 *** Use FPGA port #2 for switch fabric testing
-*** Use (2) spare/borrowed switches in DAQ data center/lab
+*** Use (2) spare/borrowed switches
 *** Using spare 8 nodes (Abbott)
-**** OS install on interim boxes - next week
+*** Using Hall-D spare 10Gbs NICs
-*** <s>Decision on Hall-D spare 10Gbs NICs for compute nodes</s>
-*** <s>Switch config for Jumbo frames</s>
 *** [https://jeffersonlab-my.sharepoint.com/:b:/r/personal/goodrich_jlab_org/Documents/EJFAT/EJFAT%20Network%20Setup.pdf?csf=1&web=1&e=hkUo8k Diagram]
 * Pending:
-** Minor f/w change for 'garbage' packets
+** <s>Minor f/w change for 'garbage' packets</s>
 ** Support C libraries for LB Host Control Plane
 ** ESnet smartnic open-source GitHub repo (April)
 ** ESnet private, forkable Jlab P4 and simulations GitHub repo (April)
 * To Do:
+** Connect
+*** FPGA port #2 to switch
+*** Mellanox NIC port #2 to switch
+*** Switch config for FPGA
+** CentOS 7 install on interim boxes - next week
 ** C-based control plane
 *** Feedback from Compute hosts design
-*** Control Plane Arp cache / network good citizen
+*** Control Plane Arp cache / network good citizen - P4 may do
-** Hall-D EJFAT + SLURM
+** Control Plane daemon for compute host
+** Jumbo Frames
 ** IPV6 testing
 ** EJFAT Subnet
+** Performance Measures (RT2022 - April 01 submission):
+*** Stress Test ERSAP / EJFAT
+*** Payload Size
+*** Reassembly
+*** Multiple Back-Ends
+*** AOT
 * [[Test Plans | Test Plan]]
 *:
 * AOT
 <hr>
-* Actions:
-** David L, will check on spare 10Gbs NICs from Hall-D

Difference between revisions of "EJFAT Group Meeting Mar. 3, 2022"

Latest revision as of 17:08, 3 March 2022

Connection Info:

Agenda:

Navigation menu

Search