HPS DAQ Reboot Procedure
From hps run
Revision as of 11:52, 23 April 2016 by
← Older revision
| Latest revision (diff) | Newer revision → (diff)
1. From the main HPS_EPICS screen, click
to open the rebooting screen.
2. From there click
Reboot Full DAQ
and the popup confirmation.
3. This will open a terminal. It may ask for
's password, in which case you enter it.
4. After rebooting the T-DAQ, press enter to proceed rebooting the SVT-DAQ (and enter
's password if requested):
4a. If during the SVT stages, it hangs more than a few seconds, abort with
as instructed by the messages in the terminal, and then click "Reboot SVT DAQ" button:
6. Restart runcontrol (it should have been killed automatically during the previous steps) in the appropriate vncviewer.
There should be a terminal open where runcontrol was last restarted, in which case you can press up to get it from the shell history and run it..
Otherwise, login as user=
runcontrol -rocs -log
Retrieved from "
What links here
This page was last modified on 23 April 2016, at 11:52.
About hps run