Difference between revisions of "Data Acquisition System"

Revision as of 12:33, 28 October 2013

DAQ Hardware

Electronic Map of Mott Crates (January 29, 2013):

Media:ElectronicsMap_20130129.pdf

Media:ElectronicsMap_20130129.pptx

Cabling of FADC, Scalers, and TDC (January 29, 2013):

Media:Cable_20130129.pdf

Media:Cable_20130129.pptx

DAQ Timing (January 29, 2013):

Media:DAQ_Timing_20130129.pdf

Media:DAQ_Timing_20130129.pptx

DAQ Software

How to run CODA

Online Monitoring

Mott Analysis

@@ Line 19: / Line 19: @@
 * [[How to run CODA]]
-= How to run CODA =
-CODA crl files are in: idaq@opsmdaq0: /opt/idaq/crl
-CODA scripts files are in: idaq@opsmdaq0: /opt/idaq/scripts
- * From an accelerator machine: '''ssh -X idaq@opsmdaq0'''
-Note: '''idaq''' is the injector DAQ account and uses ssh authorized_keys for login - no need to enter password and open few '''xterm &''' windows.
-  xterm 1: telnet iocmdaq1
-  xterm 2: msqld (the CODA msqld database is usually running unless opsmdaq0 was rebooted)
-  xterm 3: platform
-  xterm 4: codamaster
-Choose the configuration: '''Mott_Sample'''
-When the CODA MASTER panel appears, select '''Config''' => '''Enable Buttons'''.
-Select '''ET System''', '''Event Builder''', '''Event Recorder''' and '''Run Control'''.
-After doing that if you will click on '''Get Status''' you will find status of ''' ER1''', '''EB1''' and '''ROC1'''. All buttons must be green.
-Select '''Run Control''' and the main CODA panel will appear.
-== Start and Stop a Run ==
-From Run Control panel, select in the following order:
-# '''Sessions''' => '''inj'''
-# '''Configurations''' => '''Cool''' => '''Mott_Sample'''
-# '''Platform''' => '''Connect'''
-# '''Configure'''
-# '''Download'''
-# '''Prestart'''
-# '''Start'''
-At the end:
-<ol start="8">
-<li>'''Stop'''</li>
-</ol>
-and if you want to apply a change or you need a new configuration:
-<ol start="9">
-<li>'''Reset'''</li>
-</ol>
-and start from number 5.
-== Mott DAQ iocmdaq1 ==
-* There are two ways to access the Mott DAQ ioc:
-# From an accelerator machine: '''telnet iocmdaq1'''
-# From an accelerator machine: '''ioc_concole iocmdaq1'''. Here you need to enter a password to this cannot be done with the idaq account.
- The startup file is: idaq@opsmdaq0:/cs/op/iocs/iocmdaq1/startup
- The CODA boot file: idaq@opsmdaq0:/opt/coda/boot/mott_roc1.boot
 * [[Online Monitoring]]
 * [[Mott Analysis]]

Difference between revisions of "Data Acquisition System"

Revision as of 12:33, 28 October 2013

DAQ Hardware

DAQ Software

Navigation menu

Search