Difference between revisions of "Bubble Demo ME April 18, 2014"

From Ciswikidb
Jump to navigation Jump to search
Line 20: Line 20:
 
'''Joe'''
 
'''Joe'''
 
* ''What are ceramic break dimensions?'' - We have ceramic breaks in EEL-118.  Here are two options: a "long" one which is 4-1/4" overall length and a "short" one which is 2-9/16" overall length.  Both have 2-3/4" end flanges; one is rotatable and one is not.
 
* ''What are ceramic break dimensions?'' - We have ceramic breaks in EEL-118.  Here are two options: a "long" one which is 4-1/4" overall length and a "short" one which is 2-9/16" overall length.  Both have 2-3/4" end flanges; one is rotatable and one is not.
−
** [[File:140421_ceramic_options.jpg]]
+
[[File:140421_ceramic_options.jpg]]
  
−
* "What are the as-found PEPPo Faraday cup dimensions?" - The assembly is stored in EEL-117 shown in the photo below.  The 6-way cross includes both 4-1/2" and 4-5/8" flanges.  Details of the assembly are shown in the assembly drawing below.  The faraday cup assembly, viewer assembly, optical port to see view screen as installed and the thin beam exit Al window remained attached since the experiment and should be "vacuum ready".  The ports for beam entrance and ion pump were the only vacuum disconnects made thus far and are blanked off. All of the PEPPo JLAB drawings can be found at:  M:\group\positron\peppo\drawings\jlab_drawings\
+
* "What are the as-found PEPPo Faraday cup dimensions?" - The assembly is stored in EEL-117 shown in the photo below.  The 6-way cross includes both 4-1/2" and 4-5/8" flanges.  Details of the assembly are shown in the assembly drawing below.  The faraday cup assembly, viewer assembly, optical port to see view screen as installed and the thin beam exit Al window remained attached since the experiment and should be "vacuum ready".  The ports for beam entrance and ion pump were the only vacuum disconnects made thus far and are blanked off.
−
 
+
** All of the PEPPo JLAB drawings can be found at:  M:\group\positron\peppo\drawings\jlab_drawings\
−
** [[File:140421_fcup_assembly.jpg]]
 
 
** [[Media:DrawingNo.ACC2005000-0030RevisionASheetNo.1-FARADAY CUP ASSEMBLY.pdf]]
 
** [[Media:DrawingNo.ACC2005000-0030RevisionASheetNo.1-FARADAY CUP ASSEMBLY.pdf]]
 +
[[File:140421_fcup_assembly.jpg]]
  
 
* fast valve gauge drawing and location
 
* fast valve gauge drawing and location

Revision as of 11:02, 21 April 2014

April 18, 2014

Shaun, Danny, Riad, Joe reviewed goals of the Demo and Final experiment installations.

Action Items:

Shaun

  • complete DL design
  • complete Demo layout for next meeting

Danny

  • investigate who should lead DL purchase

Riad

  • collimator dimensions
  • who will fabricate collimator (JLAB or ANL)
  • aluminum dump dimensions
  • estimate of lead shielding (Demo and Final)

Joe

  • What are ceramic break dimensions? - We have ceramic breaks in EEL-118. Here are two options: a "long" one which is 4-1/4" overall length and a "short" one which is 2-9/16" overall length. Both have 2-3/4" end flanges; one is rotatable and one is not.
140421 ceramic options.jpg
  • "What are the as-found PEPPo Faraday cup dimensions?" - The assembly is stored in EEL-117 shown in the photo below. The 6-way cross includes both 4-1/2" and 4-5/8" flanges. Details of the assembly are shown in the assembly drawing below. The faraday cup assembly, viewer assembly, optical port to see view screen as installed and the thin beam exit Al window remained attached since the experiment and should be "vacuum ready". The ports for beam entrance and ion pump were the only vacuum disconnects made thus far and are blanked off.

140421 fcup assembly.jpg

  • fast valve gauge drawing and location
Retrieved from "https://wiki.jlab.org/ciswiki/index.php?title=Bubble_Demo_ME_April_18,_2014&oldid=2217"