Difference between revisions of "July 9, 2020 - ME/INJ/CIS/CASA"

Revision as of 07:07, 9 July 2020

Meeting Info

We will meet Thursday @ 10am EDT via BlueJeans
Meeting URL (for video and/or audio call in): https://bluejeans.com/909497334
Phone number (for audio call in): 1-888-240-2560
Meeting ID: 909497334#

Week of July 9

From Danny, in today's meeting, we should address these items:

did you want to adjust the extended and retracted positions of A1? see sketches on email sent 7/2.
did we want to make alignment fixtures for A1 and A2 cubes?
do we want a bellows downstream of the DP can?
for A2, do we want to re-use what we have there? also make a spare? do we already have spares? is there really an A1 in there?

Week of July 2

Week of June 25

Magnets

Mike finding small shorts to ground on Wien coils
Solenoid first article arrived
Joe M. schedule meeting for field maps and probs with Wien coils
Carlos sends Mike assembly drawing

Region 1

Last antennae arrived at shipping/receiving
Bake of parts going well, ends next week, then NEG coating
Phil/Marcy have ceramics/NEG wire

Region 2

SG sent to get (3) garage shields fabricated w/ Vince
SG still working on the tophats, designed a fixture w/ same cross-
Bottom Y-flange ordered (heat treat)
Have all pumps, vacuum parts
JG send Danny info on the laser vacuum window
MS/PA talk w/ Tony about whether to redo bellows shaft/turnbuckle mechanism

Region 3

Joe met w/ Lakshmi, she'll start evaluating a strong QW mid-July
Brock done w/ copper cavities, shipping to JLab ~next, Matt syncing up with Musson

Region 4

Existing HD coils likely okay, Reza will confirm; Lakshmi will model coils to verify assumptions
Shaun/Gary want to order cube flanges; we'll pull trigger once HD design fixed
Danny is working on the aperture design

Week of June 11

brackets arrived (10) 2-3/4 and (5) 4-/12

Region 1

Region 2

Assembly drawing for Y-girder not yet complete
SG checking top-hat dwgs w/ DM
SG give machine shop dwg of tube to check fit-up
Milhous says fixtures done, coils going winding machine today
Proc should make order of NEG flange today (8 week delivery time)
Missing 2nd order (vee-block + fixture plate)
2nd solenoid
Have 2nd yellow spool

Region 3

Last week June 4

Magnets...

MFX Solenoids (ETI)

Waiting on update on the measurements of the 1st solenoid.
The 2nd solenoid coils completed and passed all electrical testing.
In process of winding coils for the 3rd solenoid.

15 deg. bend dipole (Milhous)

Coil tooling is ready.
Coil winding will proceed week of JUN8 (when winding machine becomes available).
Discussing their QA process with the coils.
Gathered documentation on the magnet from the PR and emails.

We'll go back to work next week....

Last week May 28 talking points

Plan for the upcoming SAD and injector rebuild (Grames, Adderley, Marcy, Carlos, , Bubba, Windham)

a. Long list of jobs for new NEG BPM's here: https://wiki.jlab.org/ciswiki/index.php/200KV_gun_BPM%27s
b. Capture new solenoid on NEG pipe, NEG coat them too
c. Assemble new Y-chamber on girder, new bottom flange, new NEG's, finish coating that chamber
d. Setup vacuum chamber if Caryn is going to evaluate any windows
e. First or second, provide UITF Wien magnet to Meyers (Phil), hi-pot and map 3 coils pairs
f. Second or first, rebuild UITF Wien internals to eliminate high E-points (Bubba), finalize spacers/springs/gap (Carlos/Danny remotely)
g. Setup rebuilt Wien in UITF and HV test (Carlos)
h. Work w/ Shaun to test top-hats and garage needed for John's y-chamber design
i. Collect up dozens of vacuum parts, clean, and get ready for SAD (pipes, bellows, top-hats)
j. Work w/ Danny/Shaun/S&A to fabricate and assemble new A2 aperture on a cube
k. Work w/ Scott to assembly dummy of motorized A1 on new cube, ready for shutdown
l. 11 Collect up all the girders, supports, hardware
m. Build two prebuncher cavities?
n. Work w/ shop to capture Wien quads on crosses, weld on flanges, for tunnel viewers
o. Build up and vacuum test the y chamber: RGA, base pressure
p. Build up and test the docking chamber as needed (won’t be needed until later in the shutdown)

Last Week's Talking Points - May 21

Modeling

Solenoid

Progress!

First coat of green paint on "core"

Y/Laser chamber viewers

Design status

Wien Filter

From Mike Beck - The 6 new "Wien" coils meet dimensional check acceptance criteria and counted turn count all as required at 2 layers x 13 turns per. Will put spread sheet with dimensional data together in coming days. Also, checked resistance on all 6, the range was consistent at ~.2 ohms. The visual quality of coils that Technicoil provided are nice in appearance.  Will conduct hipot testing when able to get back onsite and confirm the rest of QA acceptance testing, fit to core (when core arrives), and mapping required.

Wien coils in crate at MMF

MHD A1/A2 Steering Coils

CED from Gary Croke => MHD: BL = 28.5 G-cm/A with +/- 2A limits
Existing design 60 turns (approximately) coil using AWG 16 wire media:200521_aperture 1.pdf media:39200-0213.pdf

PSS Kicker

ME model status
Getting quotes (2-4)

Wien quads

CED from Gary Croke => MQW: B'L = 15 G/A with +/- 3A limits

Songsheets

Will circulate when done

@@ Line 6: / Line 6: @@
 == Week of July 9 ==
+From Danny, in today's meeting, we should address these items:
+* did you want to adjust the extended and retracted positions of A1? see sketches on email sent 7/2.
+* did we want to make alignment fixtures for A1 and A2 cubes?
+* do we want a bellows downstream of the DP can?
+* for A2, do we want to re-use what we have there? also make a spare? do we already have spares? is there really an A1 in there?
 == Week of July 2 ==