Difference between revisions of "Kerr - August 5, 2016"

From Ciswikidb
Jump to navigation Jump to search
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[[file:Puckgeometry.jpeg|thumb|upright=2.5|Use this to interpret Excel descriptions.]]
 
[[file:Puckgeometry.jpeg|thumb|upright=2.5|Use this to interpret Excel descriptions.]]
 +
 +
'''1.'''
 +
'''NEAR Trials with Steel only'''
 +
 +
The following 'a.' and 'b.' describes measurements done with;
 +
* STEEL puck only, {with the exception of a mirror null}
 +
* Angle between laser and photodiode 38.6 -+2.4 degrees
 +
* The Setup was "NEAR" The solenoid
 +
* Center of Optics Stage {between Laser and Photodiode} 58 -+ 1 cm from puck
 +
 +
a. -->->->[[media:NearSetup.xlsx]]
 +
 +
Then Puck stability was investigated
 +
 +
b. -->->-> [[media:Puckchanges.xlsx]]
 +
 +
 +
'''2.'''
 +
'''FAR trials with STEEL and Moly'''
 +
 +
The following file describes measurements done with;
 +
* STEEL and MOLY and a Mirror
 +
* Angle between laser and photodiode 5.31 -+0.45 degrees
 +
* The Setup was "FAR" from The solenoid
 +
* Photodiode 140 cm -+ 2 cm from puck
 +
 +
-->->-> [[media:Farsetup.xlsx]]
 +
 +
'''''IMPORTANT'' NOTE: when observing data sheets, Vdc (ave) (typically column C) is in Volts... Whereas V1f and V2f, (Columns G and K) are in miliVolts.'''
 +
 +
 +
To Convert Current to Magnetic Field use MMF data --->>>[[media:Currenttomagneticfieldmeasurements.xlsx]]
 +
 +
If beam is off center, use the x-trans data to create a new linear relation with same slope, but different y intercept.
 +
 +
 +
 +
'''3.'''
 +
'''''Final Report and Poster'''''
 +
 +
Report --> [[Media:HardyFinalReport.docx]]
 +
 +
Poster --> [[media:HardyFinalPoster.pptx]]

Latest revision as of 11:33, 9 August 2016

Use this to interpret Excel descriptions.

1. NEAR Trials with Steel only

The following 'a.' and 'b.' describes measurements done with;

  • STEEL puck only, {with the exception of a mirror null}
  • Angle between laser and photodiode 38.6 -+2.4 degrees
  • The Setup was "NEAR" The solenoid
  • Center of Optics Stage {between Laser and Photodiode} 58 -+ 1 cm from puck

a. -->->->media:NearSetup.xlsx

Then Puck stability was investigated

b. -->->-> media:Puckchanges.xlsx


2. FAR trials with STEEL and Moly

The following file describes measurements done with;

  • STEEL and MOLY and a Mirror
  • Angle between laser and photodiode 5.31 -+0.45 degrees
  • The Setup was "FAR" from The solenoid
  • Photodiode 140 cm -+ 2 cm from puck

-->->-> media:Farsetup.xlsx

IMPORTANT NOTE: when observing data sheets, Vdc (ave) (typically column C) is in Volts... Whereas V1f and V2f, (Columns G and K) are in miliVolts.


To Convert Current to Magnetic Field use MMF data --->>>media:Currenttomagneticfieldmeasurements.xlsx

If beam is off center, use the x-trans data to create a new linear relation with same slope, but different y intercept.


3. Final Report and Poster

Report --> Media:HardyFinalReport.docx

Poster --> media:HardyFinalPoster.pptx