Difference between revisions of "Kerr - August 5, 2016"

From Ciswikidb
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 21: Line 21:
  
 
The following file describes measurements done with;
 
The following file describes measurements done with;
* STEEL and MOLY and a Mirro
+
* STEEL and MOLY and a Mirror
 
* Angle between laser and photodiode 5.31 -+0.45 degrees
 
* Angle between laser and photodiode 5.31 -+0.45 degrees
 
* The Setup was "FAR" from The solenoid
 
* The Setup was "FAR" from The solenoid
Line 40: Line 40:
 
'''''Final Report and Poster'''''
 
'''''Final Report and Poster'''''
  
Report --> [[Media:HardyFinalReport.docx]] Poster --> [[media:HardyFinalPoster.pptx]]
+
Report --> [[Media:HardyFinalReport.docx]]  
 +
 
 +
Poster --> [[media:HardyFinalPoster.pptx]]

Latest revision as of 11:33, 9 August 2016

Use this to interpret Excel descriptions.

1. NEAR Trials with Steel only

The following 'a.' and 'b.' describes measurements done with;

  • STEEL puck only, {with the exception of a mirror null}
  • Angle between laser and photodiode 38.6 -+2.4 degrees
  • The Setup was "NEAR" The solenoid
  • Center of Optics Stage {between Laser and Photodiode} 58 -+ 1 cm from puck

a. -->->->media:NearSetup.xlsx

Then Puck stability was investigated

b. -->->-> media:Puckchanges.xlsx


2. FAR trials with STEEL and Moly

The following file describes measurements done with;

  • STEEL and MOLY and a Mirror
  • Angle between laser and photodiode 5.31 -+0.45 degrees
  • The Setup was "FAR" from The solenoid
  • Photodiode 140 cm -+ 2 cm from puck

-->->-> media:Farsetup.xlsx

IMPORTANT NOTE: when observing data sheets, Vdc (ave) (typically column C) is in Volts... Whereas V1f and V2f, (Columns G and K) are in miliVolts.


To Convert Current to Magnetic Field use MMF data --->>>media:Currenttomagneticfieldmeasurements.xlsx

If beam is off center, use the x-trans data to create a new linear relation with same slope, but different y intercept.


3. Final Report and Poster

Report --> Media:HardyFinalReport.docx

Poster --> media:HardyFinalPoster.pptx