Difference between revisions of "KPP Run"

From clas12-run
Jump to navigation Jump to search
Line 93: Line 93:
 
# Study tracking efficiency: four HV setings: 8, 9, 10, 11, 12, for each HV four threshold settings: 30, 45, 60, 75. 10 min runs each.
 
# Study tracking efficiency: four HV setings: 8, 9, 10, 11, 12, for each HV four threshold settings: 30, 45, 60, 75. 10 min runs each.
 
# Continue with data taking torus at -1900 A, target at 13.125, DC HV seting #11, thresholds 45 mV
 
# Continue with data taking torus at -1900 A, target at 13.125, DC HV seting #11, thresholds 45 mV
# Switch target (call RC) continue data taking
+
# Switch target (call RC) and continue data taking till Sunday morning
 +
# Change torus polarity, setting +1900 A. While torus current is changing, perform harp scans and FSD studies (see below)
 
# (Sunday) Perform beam studies (call RC and beamline, <b> Turn off DC HV </b>):
 
# (Sunday) Perform beam studies (call RC and beamline, <b> Turn off DC HV </b>):
 
#*<del>Do harp scans - 2C21, "tagger", and 2H01</del> done while changing the torus setting  
 
#*<del>Do harp scans - 2C21, "tagger", and 2H01</del> done while changing the torus setting  
 
#*<del>Run 2H01 at low speed (speed=0.1) to 13.3 position and save strip chart of motor position together with downstream halo counters</del> done while changing the torus setting, the first carbon target was found at ~10.6
 
#*<del>Run 2H01 at low speed (speed=0.1) to 13.3 position and save strip chart of motor position together with downstream halo counters</del> done while changing the torus setting, the first carbon target was found at ~10.6
 
#*Test FSD system, run Struck scaler with 300um dwel time, ask MCC to set FSD trip time integration times for FSD channels (1 old and 3 new) to 1 ms. Un-mask one FSD channel, run collimator with slmall steps to left or right untill it will intercept beam tails. It will raise rateson halo counters.   
 
#*Test FSD system, run Struck scaler with 300um dwel time, ask MCC to set FSD trip time integration times for FSD channels (1 old and 3 new) to 1 ms. Un-mask one FSD channel, run collimator with slmall steps to left or right untill it will intercept beam tails. It will raise rateson halo counters.   
# Continue data taking with reverse field till 9pm, Sector-2 only, high EC-inner threshold
+
# Continue data taking at 1900 A, trigger Sector-2 only high threshold
# Change torus setting to positive polarity, 1900 A set point, continue data taking
+
# Switch to 6-sector trigger, take data till Monday morning.
 +
# <b> Run ends 7 am on Monday</b>
 
<!--
 
<!--
 
== The Hall was closed and brought to controlled access at 8pm on Thursday, February 2 ==
 
== The Hall was closed and brought to controlled access at 8pm on Thursday, February 2 ==

Revision as of 16:34, 4 February 2017

[edit]


Clas12design.png