Difference between revisions of "Engineering Run"

From clas12-run
Jump to navigation Jump to search
Line 109: Line 109:
 
* Complete test plan for tracking trigger checkout. For each setting record main scaler GUI and CLAS12 VTP Trigger Scaler GUI in the logbook.
 
* Complete test plan for tracking trigger checkout. For each setting record main scaler GUI and CLAS12 VTP Trigger Scaler GUI in the logbook.
 
** <s>75 nA: 10M events with trigger prod/dc_elec_htcc_1phe_pcal_300.cnf</s>
 
** <s>75 nA: 10M events with trigger prod/dc_elec_htcc_1phe_pcal_300.cnf</s>
** 50 nA: 10M events with trigger prod/dc_elec_htcc_1phe_pcal_300.cnf
+
** <s>50 nA: 10M events with trigger prod/dc_elec_htcc_1phe_pcal_300.cnf</s>
** 50 nA: 10M events with trigger prod/dc_dcno_elec_htcc_1phe_pcal_300.cnf
+
** <s>50 nA: 10M events with trigger prod/dc_dcno_elec_htcc_1phe_pcal_300.cnf</s>
** 30 nA: 10M events with trigger prod/dc_elec_htcc_1phe_pcal_300.cnf
+
** <s>30 nA: 10M events with trigger prod/dc_elec_htcc_1phe_pcal_300.cnf</s>
** 30 nA: 10M events with trigger prod/dc_dcno_elec_htcc_1phe_pcal_300.cnf
+
** <s>30 nA: 10M events with trigger prod/dc_dcno_elec_htcc_1phe_pcal_300.cnf</s>
* Take regular data taking with PROD/elec_htcc_1phe_pcal_300.cnf at 5 nA overnight; 2 hours long runs (low current runs for subsystem calibrations). Turn on the FTOF S4 panel-2 counters before starting acquisition.
+
* Take regular data taking with PROD/elec_htcc_1phe_pcal_300.cnf at 5 nA; 2 hours long runs (low current runs for subsystem calibrations). Turn on the FTOF S4 panel-2 counters before starting acquisition.
 
* Carry out FT luminosity response studies with FT-only trigger for 2 hours. This work will be led by FT system experts.
 
* Carry out FT luminosity response studies with FT-only trigger for 2 hours. This work will be led by FT system experts.
 
* DC threshold test: ask the DAQ expert to set the DC Region 2 thresholds to 60 mV and take one run (1 hr) at 30 nA with elec_htcc_1phe_pcal_300.cnf trigger. Once completed, reverted to the nominal threshold of 45 mV.
 
* DC threshold test: ask the DAQ expert to set the DC Region 2 thresholds to 60 mV and take one run (1 hr) at 30 nA with elec_htcc_1phe_pcal_300.cnf trigger. Once completed, reverted to the nominal threshold of 45 mV.

Revision as of 10:21, 1 February 2018

[edit]


Clas12design.png