Difference between revisions of "Meeting 23 August 2019"
Jump to navigation
Jump to search
(Created page with "'''DISCUSSION MATERIAL''' [https://wiki.jlab.org/cuawiki/images/d/d8/CPS_configurationsRE.pdf CPS configurations] [https://wiki.jlab.org/cuawiki/images/8/8a/CPS_article_rev0...") |
|||
| Line 1: | Line 1: | ||
'''DISCUSSION MATERIAL''' | '''DISCUSSION MATERIAL''' | ||
| + | |||
| + | [https://wiki.jlab.org/cuawiki/images/a/a7/Compactphotonsource.pdf CPS CAD model] | ||
[https://wiki.jlab.org/cuawiki/images/d/d8/CPS_configurationsRE.pdf CPS configurations] | [https://wiki.jlab.org/cuawiki/images/d/d8/CPS_configurationsRE.pdf CPS configurations] | ||
[https://wiki.jlab.org/cuawiki/images/8/8a/CPS_article_rev0.pdf CPS Article V0] | [https://wiki.jlab.org/cuawiki/images/8/8a/CPS_article_rev0.pdf CPS Article V0] | ||
| − | |||
Latest revision as of 14:49, 23 August 2019
DISCUSSION MATERIAL
ACTION ITEMS
- CPS model and radiation studies
- Calculate level of radiation at magnet coil (after 1 year) - independent of model one uses, factor 10 good enough for now. Once have the new numbers contact Japanese vendor for magnet quote for coils (Gabriel, Bogdan)
- Clarify conceptual design idea #6: from formal point of view it's an ellipsoid, but practically will be approximated by, e.g. sphere with something staggered (Rolf)
- Identify a person/persons from KLong collaboration who would work on simulation/model and invite to join the CPS meetings (Igor)
- Article - all comments must be in by 8/30/19 (David H, Donal, Bogdan)
- David H implement textual comments
- Donal comments in next few days
- Bogdan comments coming
- Igor comments - see his email for details
- Check number of experiments described vs. under consideration - clarify
- Tungsten powder density - explain where it comes from, e.g. tungsten cannot be machined, density depends on what additives are added, for CPS in Hall A/C have 16.3g/cm3, about 20% lower than maximum (weight consideration in Hall A/C and easier to machine if density lower)
- For quotes used 16.3 g/cm3 as well
Discussion Details
- CPS CAD mode presentation - done by Dhara Liyanage
- done with all the correct dimensions and materials except for maybe the copper core
- overall design of magnet components now in CAD - simplifies communications with vendors
- CPS model
- Gabriel is working on it
- CPS article
- Draft with line numbers is posted
- Goal: submit article before the PSTP2019 conference
- Details of the full implementation study ongoing right now is not needed, but mentioning the overall idea could be good
NEXT MEETING: FRIDAY 13 SEPTEMBER at 11:00 AM (ET)