Difference between revisions of "Cables"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
== Custom cable from voltage divider to PCB boards == | == Custom cable from voltage divider to PCB boards == | ||
| − | The cable has a SAMTEC connector [https://www.samtec.com/products/ipd1-05-s-k IPD1-05-S-K] on one side. On the other side the cable has a [https://int.rsdelivers.com/product/rs-pro/r19-003-03-0332110ll/rs-pro-straight-50%cf%89-cable-mount-coaxial-connector/5463210 SMA RS PRO 546-3210] connector and [https://www.fischerconnectors.com/sites/default/files/specifications/tech_specs_full_1.7_oct17.pdf Fischer connector S 102 A 018]. The cable length is 375 mm. | + | The cable has a SAMTEC connector [https://www.samtec.com/products/ipd1-05-s-k IPD1-05-S-K] on one side. On the other side the cable has a [https://int.rsdelivers.com/product/rs-pro/r19-003-03-0332110ll/rs-pro-straight-50%cf%89-cable-mount-coaxial-connector/5463210 SMA RS PRO 546-3210] connector ([https://wiki.jlab.org/cuawiki/images/0/07/SMA_546_3210.pdf Datasheet], [https://wiki.jlab.org/cuawiki/images/f/fe/SMA_D%C3%A9nudage.pdf Crimp instructions]) and [https://www.fischerconnectors.com/sites/default/files/specifications/tech_specs_full_1.7_oct17.pdf Fischer connector S 102 A 018]. The cable length is 375 mm. |
* [https://wiki.jlab.org/cuawiki/images/c/c7/C%C3%A2blage_Embase_Interface_%281%29.pdf Cable schematics] | * [https://wiki.jlab.org/cuawiki/images/c/c7/C%C3%A2blage_Embase_Interface_%281%29.pdf Cable schematics] | ||
* Picture of the cable: | * Picture of the cable: | ||
[[File:NJOZwN.jpg|800px|NPS cable]] | [[File:NJOZwN.jpg|800px|NPS cable]] | ||
| + | |||
| + | == PCB boards (one per detector column) == | ||
| + | |||
| + | The HV and the anode signals of each column of the detector is routed through a PCB board. This boards also holds one LED per channel. | ||
| + | |||
| + | [[File:GoWTJr.png|400px]] | ||
| + | |||
| + | * Board schematics | ||
Revision as of 04:29, 25 August 2020
Voltage divider
- Voltage divider schematics
- The connector on the voltage divider is Samtec Part # IPL1-105-01-L-S-RA-K:
- Pictures of the assembly:
Custom cable from voltage divider to PCB boards
The cable has a SAMTEC connector IPD1-05-S-K on one side. On the other side the cable has a SMA RS PRO 546-3210 connector (Datasheet, Crimp instructions) and Fischer connector S 102 A 018. The cable length is 375 mm.
- Cable schematics
- Picture of the cable:
PCB boards (one per detector column)
The HV and the anode signals of each column of the detector is routed through a PCB board. This boards also holds one LED per channel.
- Board schematics