Difference between revisions of "Scalar gui"

Revision as of 17:44, 26 March 2018

Back to Tritium-Main Back to How to Back to Third Person

Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening "xscaler" GUI

These screens are generally already open on the agen5 machine (above the DAQ machine)

@@ Line 3: / Line 3: @@
 [[complete guide|Direct link to the entire repository of information.]]
-===Starting xscaler (HRS) and checking raw trigger rates (updated nov 5, 2014)===
+===Starting xscaler (HRS) and checking raw trigger rates (updated 03/26/18)===
 Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening '''"xscaler"''' GUI
@@ Line 9: / Line 9: @@
 * If xscaler is not open then follow these instructions:
-** login as '''a-onl''' on '''adaq1''' or '''adaq2''' machines (eg: "'''ssh a-onl@adaq1'''" )
+** login as '''a-onl''' on '''a-onl1'' machine (eg: "'''ssh a-onl@a-onl1'''" )
-** passwords are written on the white board
+** passwords are written on the password paper
-** type "'''goxscaler'''" and follow the instructions printed on the screen
+** type "'''gotritium'''" to move to the official tritium replay directory
+** Then type cd ../scaler
 ** type "'''./xscaler Left'''" or "'''./xscaler Right'''" to access xscaler display