Difference between revisions of "Fall 2018 Optics Runs"
Jump to navigation
Jump to search
m |
|||
Line 1: | Line 1: | ||
[https://wiki.jlab.org/tegwiki/index.php/2018_Fall_Run '''Back to 2018 Fall Run'''] | [https://wiki.jlab.org/tegwiki/index.php/2018_Fall_Run '''Back to 2018 Fall Run'''] | ||
− | |||
− | |||
− | |||
− | |||
− | === eK optics with coincidence CODA=== | + | == Optics with 2 pass beam == |
+ | === eK optics runs with coincidence CODA=== | ||
<table border="1" style="width:80%"> | <table border="1" style="width:80%"> | ||
<tr> | <tr> | ||
Line 80: | Line 77: | ||
</tr> | </tr> | ||
</table> | </table> | ||
+ | == Optics with 5 pass beam == | ||
+ | * E0 = 10.6 GeV, Theta_L = 17 Degrees, Theta_R = 24.00 Degrees | ||
+ | * Sieve in between run 3451 and 3479. | ||
+ | * The BMP Y behaved wired during optics runs. ([https://logbooks.jlab.org/entry/3600121 see log]). Per Jason we can use the Harp scan position at (1.4,1.8)[https://logbooks.jlab.org/entry/3598707 see log] instead of the BPM to decide the beam position for optics calibration. | ||
+ | |||
=== Optics Runs with Sieve Out=== | === Optics Runs with Sieve Out=== | ||
==== HRS-L==== | ==== HRS-L==== |
Revision as of 17:41, 30 November 2018
Optics with 2 pass beam
eK optics runs with coincidence CODA
Run-No | Angle (L/RHRS) | Momentum (L/RHRS) | Comments |
111718, 111719 | 13.2/13.2 | 2.218, 1.823 | PS1=10, PS4=20 |
111721 | 13.2/13.2 | 2.218, 1.823 | PS1=5, PS4=50, PS5=1 |
Hydrogen Elastic with LHRS
Run-No | Theta (Degree) | Momentum | Q1 current | Comments |
111702 | 13.2 | 3.93 | 882.8A | data taken during e'K. Unstable beam x position. Better not use trigger 2 so no need to recalibrate timing |
111841 | 13.2 | 3.93 | 882.8A | data taken during e'K |
111842 | 13.2 | 3.82 | 875A | data taken during e'K |
3605 | 17 | 3.82 | 875A | |
3565,3566,3567 | 17 | 3.67 | 823.6A | |
3621 | 17 | 3.57 | Q1 regulator on |
Optics with 5 pass beam
- E0 = 10.6 GeV, Theta_L = 17 Degrees, Theta_R = 24.00 Degrees
- Sieve in between run 3451 and 3479.
- The BMP Y behaved wired during optics runs. (see log). Per Jason we can use the Harp scan position at (1.4,1.8)see log instead of the BPM to decide the beam position for optics calibration.
Optics Runs with Sieve Out
HRS-L
Run-No | E'(GeV/c) | Theta (Degree) | Targets | Current | Prescale | Total Events | Comments |
3443,3448,3449 | 3.93 | 17.009 | Optics | 9.00 | 1/1/1 | ||
3444 | 3.82 | 17.009 | Optics | 9.00 | 1/1/1 | ||
3447 | 3.67 | 17.009 | Optics | 9.00 | 1/1/1 | ||
3432-3442 | 3.82 | 17.009 | Tianium | 5.00 | 1/1/1 | Harp Scan run at different beam position | |
3445 | 3.82 | 17.009 | Tianium | 9.00 | 1/1/1 | ||
3446 | 3.67 | 17.009 | Titanium | 9.00 | 1/1/1 |
HRS-R
Run-No | E'(GeV/c) | Theta (Degree) | Targets | Current | Prescale | Total Events | Comments |
93486,93487,93490, 93491,93492 | 3.10 | 24.016 | Optics | 9 | 1/1/1 | ||
93488, 93489 | 3.10 | 24.016 | Titanium | 9 | 1/1/1 | ||
93474-93485 | 3.10 | 24.016 | Titanium | 5 | 1/1/1 | Harp Scan Runs |
Optics Runs with Sieve In
HRS-L
- The raster was on for the first three runs then was off since as indicated.
Run-No (xxxx) | E'(GeV/c) | Theta (Degree) | Targets | Current | Prescale | Total Events | Comments |
3456 | 3.93 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 900A raster off | |
3452 | 3.93 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 900A, raster on | |
3457 | 3.93 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 882.8A, raster off | |
3453 | 3.93 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 882.8A, raster on | |
3455 | 3.93 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 870.7A, regulator on, standard tune, raster off | |
3454 | 3.93 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 870.7A, regulator on, standard tune, raster on | |
N/A | 3.93 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 820.6A, linear tune, raster off | |
3459, 3460, 3461 | 3.93 | 17.009 | Optics | 9.00 | 1/1/1 | Q1, I = 882.8A, best tune, raster off |
- From this point, all raster off
Run-No (xxxx) | E'(GeV/c) | Theta (Degree) | Targets | Current | Prescale | Total Events | Comments |
3462,3469,3470 | 3.82 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 875A | |
3463 | 3.82 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 855A | |
3464, 3465 | 3.82 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 797.6A, linear tune | |
3471-3474 | 3.82 | 17.009 | Optics | 9.00 | 1/1/1 | Q1, I = 875 A, best tune |
Run-No (xxxx) | E'(GeV/c) | Theta (Degree) | Targets | Current | Prescale | Total Events | Comments |
3467 | 3.67 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 823.6 A | |
3468 | 3.67 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1, I = 858 A | |
3475,3476,3478 | 3.67 | 17.009 | Optics | 9.00 | 1/1/1 | Q1, I = 823.6 A, best tune | |
3479 | 3.67 | 17.009 | Optics | 9.00 | 1/1/1 | Q1, I = 823.6 A, best tune, Sieve Slit is OUT |
Run-No (xxxx) | E'(GeV/c) | Theta (Degree) | Targets | Current | Prescale | Total Events | Comments |
3477 | 2.5 | 17.009 | Titanium | 9.00 | 1/1/1 | Q1 regulator on, no saturation |
HRS-R
Run-No (xxxx) | E'(GeV/c) | Theta (Degree) | Targets | Current | Prescale | Total Events | Comments |
93495 | 3.10 | 24.016 | Titanium | 9 | 1/1/1 | raster on | |
93496 - 93503, 93506-93508 | 3.10 | 24.016 | Titanium | 9 | 1/1/1 | raster off | |
93504,93505,93509-93517 | 3.10 | 24.016 | Optics | 9 | 1/1/1 | raster off | |
93518 | 3.10 | 24.016 | Optics | 9 | 1/1/1 | raster off, sieve is OUT |