HVgui
High Voltage controls
LHRS/RHRS : High Voltage controls
How to start the HV gui!
Login as "aslow" on the "adaqsc" computer.
cd slowc/
To run the Left HRS alone: ./hvs LEFT
To run the Right HRS alone: ./hvs RIGHT
To run the beamline (Compton) crate: ./hvs BEAMLINE
If a alarm is triggered for the HV system.
- Try to reset the channel that has tripped
- If this does not turn the alarm off, call expert on cal.
HRS HV alarm
If you hear about Left/Right HV alarm (either Red flashing rectangular box on screen .OR. Voice), please look at either LeftHRS or RightHRS HV GUI which are running on "adaqsc"
- make sure "beepServer" is running on hapc3...If you are not sure run "/home/adaq/beep/start_beepserver"
Alarm Detail hapc3.jlab.org (which has HV GUI screen here !, username:adaq, passwd: same as adaq1)
/home/adaq/beep/ -> LeftHRS_HV_Alarm.wav
adev@adaq1.jlab.org (username:adaq, passwd: NOT same as adaq1: gev instead daq)
/adaqfs/home/adev/slowc/hvg.newAug2014/hvtools -. VoiceAlarm.java "ssh adaq@hapc3 /usr/bin/play /home/adaq/beep/call_alarm3" ==Links to more HV help== These two links provide some <b>old</b> but useful information. <pre> http://hallaweb.jlab.org/equipment/daq/HVhelp.html http://hallaweb.jlab.org/equipment/daq/gen_slow_control.html
For experts
https://hallaweb.jlab.org/wiki/index.php/HV_HowTo_for_Experts
or contact to Kijun Park <mailto:parkkj@jlab.org>