Difference between revisions of "Howto access remote scopes"
Jump to navigation
Jump to search
m |
|||
| Line 43: | Line 43: | ||
* To access the scope type in the IP address in a browser (<b>It doesn't currently work from the adaq2 computer!</b>). Click on "Browser Web Control" in the web page and choose "Table Remote Front Panel" afterwards. | * To access the scope type in the IP address in a browser (<b>It doesn't currently work from the adaq2 computer!</b>). Click on "Browser Web Control" in the web page and choose "Table Remote Front Panel" afterwards. | ||
Alternatively, you can use vncviewer via the command "vncviewer 129.57.164.227:0". | Alternatively, you can use vncviewer via the command "vncviewer 129.57.164.227:0". | ||
| − | * The following inputs are plugged into the 4-chan scope for setting up ADC gate for shower and preshower (09/ | + | * The following inputs are plugged into the 4-chan scope for setting up ADC gate for shower and preshower (09/30/18): |
{| border="1" | {| border="1" | ||
!Channel!!Signal | !Channel!!Signal | ||
|- | |- | ||
| − | ||1|| | + | ||1||T4 |
|- | |- | ||
| − | ||2|| | + | ||2||T5 |
|- | |- | ||
| − | ||3|| | + | ||3||empty (channel broken) |
|- | |- | ||
| − | ||4|| | + | ||4||T6 |
|- | |- | ||
|} | |} | ||
| + | * The connections of T4-T6 are from the Trigger Logic. Therefore, T6 is shifted by an extra of 16ns at the NIM-ECL trigger input. | ||
* For the power remote control the 4-chan scope is plugged in hareboot32 channel 4 | * For the power remote control the 4-chan scope is plugged in hareboot32 channel 4 | ||
| Line 62: | Line 63: | ||
* This scope is accessible in observer mode if you type in the IP address in the browser. | * This scope is accessible in observer mode if you type in the IP address in the browser. | ||
* To access it in control mode, one has to open /escope/index.html in the adaq home folder with a browser. | * To access it in control mode, one has to open /escope/index.html in the adaq home folder with a browser. | ||
| − | * Single arm setup: The following inputs are plugged into the 4-chan scope (09/ | + | * Single arm setup: The following inputs are plugged into the 4-chan scope (09/29/18): |
{| border="1" | {| border="1" | ||
| Line 76: | Line 77: | ||
|- | |- | ||
|} | |} | ||
| − | + | ||
Revision as of 23:20, 14 October 2018
Back to Tritium-Main Back to How to Back to Third Person
Direct link to the entire repository of information.
LHRS scopes
- A 4-chan scope and a 2-chan scope is installed. Both scopes are from Tektronix.
- The IP address of the 4-chan scope is 129.57.192.253.
- The IP address of the 2-chan scope is 129.57.192.128 .
- Both scopes are accessible in observer mode if you type in the IP address in the browser.
- To access them in control mode, one has to open /escope/index.html in the adaq home folder with a browser.
- The following inputs are plugged into the 4-chan scope for trigger checkout step 1 (12/08/17):
| Channel | Signal |
|---|---|
| 1 | S0 |
| 2 | S2 |
| 3 | S0&S2 |
| 4 | GC |
- The following inputs are plugged into the 2-chan scope for trigger checkout step 2 (01/18/18):
| Channel | Signal |
|---|---|
| 1 | T1 |
| 2 | T3 |
| ext | T2 |
- For the power remote control the 4-chan scope is plugged in hareboot2 channel 6 and the 2-chan scope is plugged in hareboot2 channel 8.
RHRS scopes
- A 4-chan scope with remote connection is installed. It is a MSO-X-3024A from Agilent.
- The IP address of the 4-chan scope is 129.57.164.227.
- To access the scope type in the IP address in a browser (It doesn't currently work from the adaq2 computer!). Click on "Browser Web Control" in the web page and choose "Table Remote Front Panel" afterwards.
Alternatively, you can use vncviewer via the command "vncviewer 129.57.164.227:0".
- The following inputs are plugged into the 4-chan scope for setting up ADC gate for shower and preshower (09/30/18):
| Channel | Signal |
|---|---|
| 1 | T4 |
| 2 | T5 |
| 3 | empty (channel broken) |
| 4 | T6 |
- The connections of T4-T6 are from the Trigger Logic. Therefore, T6 is shifted by an extra of 16ns at the NIM-ECL trigger input.
- For the power remote control the 4-chan scope is plugged in hareboot32 channel 4
On January 12th 2018 a second 4-chan remote scope was installed (Textronix 3054B)
- The IP address of this 4-chan scope is 129.57.164.45 or hascope4.
- This scope is accessible in observer mode if you type in the IP address in the browser.
- To access it in control mode, one has to open /escope/index.html in the adaq home folder with a browser.
- Single arm setup: The following inputs are plugged into the 4-chan scope (09/29/18):
| Channel | Signal | Length of connection cable |
|---|---|---|
| 1 | S0 | 8ns |
| 2 | S2 | 8ns |
| 3 | S0 & S2 (triggered) | 8ns |
| 4 | GC | 8ns |
- Coincidence arm setup: The following inputs are plugged into the 4-chan scope (04/12/18):
| Channel | Signal | Length of connection cable |
|---|---|---|
| 1 | T1 | 8ns |
| 2 | S2&S0 RHRS | 8ns |
| 3 | S2 RHRS | 8ns |
| 4 | S0 RHRS | 8ns |
- The connections of channel 2-4 are before the coincidence trigger logic. T1 is from FIFO.
- For the power remote control the 4-chan scope is plugged in hareboot32 channel 5