Difference between revisions of "Installation and Commissioning"
Jump to navigation
Jump to search
| Line 433: | Line 433: | ||
=== Target Boiling Study === | === Target Boiling Study === | ||
| − | * <b>H3 Target</b> | + | * <b>H3 and He3 Target. Use C12 target as a normalization check for beam-current dependent rate check.</b> |
<table border="1" style="width:80%"> | <table border="1" style="width:80%"> | ||
<tr> | <tr> | ||
| Line 477: | Line 477: | ||
| − | + | ||
<table border="1" style="width:80%"> | <table border="1" style="width:80%"> | ||
<tr> | <tr> | ||
Revision as of 17:32, 15 November 2016
Installation Plan and Commissioning Plan Page (Back to Tritium-Main)
Installation Schedule
Commissioning Schedule
BPM calibration runs (Bull's eye scan)
| Relative position | LHRS CODA run | RHRS CODA run | Harp scan entry no. |
| (0,0) | |||
| (2,2) | |||
| (2,-2) | |||
| (-2,-2) | |||
| (-2,2) | |||
| (3,3) | |||
| (-3,-3) |
BCM calibration runs
| LHRS CODA run | RHRS CODA run | BCM logger | Comments |
Optics commissioning runs
- LHRS optics runs
- Step L1: Procedure with Sieve-slit
| Run number | Target | Sieve | Raster | Ebeam [GeV] | P0 [GeV/c] | θe [deg] | Comment |
| Multi-foil carbon | Yes | Off | |||||
| 15cm LH2 | Yes | 2 x 2 mm2 | |||||
| Multi-foil carbon | Yes | Off |
- Step L2: Delta Scan with Proton Elastic (with sieve slit)
| Run number | Target | Sieve | Raster | Ebeam [GeV] | P0 [GeV/c] | θe [deg] | Comment |
| 15cm LH2 | Yes | 2 x 2 mm2 | Delta scan ΔP=-4%; | ||||
| 15cm LH2 | Yes | 2 x 2 mm2 | Delta scan ΔP=-2%; | ||||
| 15cm LH2 | Yes | 2 x 2 mm2 | Delta scan ΔP=0%; | ||||
| 15cm LH2 | Yes | 2 x 2 mm2 | Delta scan ΔP=+2%; | ||||
| 15cm LH2 | Yes | 2 x 2 mm2 | Delta scan ΔP=+4%; |
- Step L3: Dummy Target Runs (with sieve slit)
| Run number | Target | Sieve | Raster | Ebeam [GeV] | P0 [GeV/c] | θe [deg] | Comment |
| 15cm dummy | Yes | 2 x 2 mm2 | +4% delta scan setting |
- Step L4: Proton Elastic Kinematics
| Run number | Target | Sieve | Raster | Ebeam [GeV] | P0 [GeV/c] | θe [deg] | Comment |
| Single-foil carbon | No | Off | |||||
| 15cm dummy | No | 2 x 2 mm2 | |||||
| 15cm LH2 | No | 2 x 2 mm2 |
Optics commissioning runs
- RHRS optics runs
- Step R1: Procedure with Sieve-slit
| Run number | Target | Sieve | Raster | Ebeam [GeV] | P0 [GeV/c] | θe [deg] | Comment |
| Multi-foil carbon | Yes | Off | |||||
| 15cm LH2 | Yes | 2 x 2 mm2 | |||||
| Multi-foil carbon | Yes | Off |
- Step R2: Delta Scan with Proton Elastic (with sieve slit)
| Run number | Target | Sieve | Raster | Ebeam [GeV] | P0 [GeV/c] | θe [deg] | Comment |
| 15cm LH2 | Yes | 2 x 2 mm2 | Delta scan ΔP=-4%; | ||||
| 15cm LH2 | Yes | 2 x 2 mm2 | Delta scan ΔP=-2%; | ||||
| 15cm LH2 | Yes | 2 x 2 mm2 | Delta scan ΔP=0%; | ||||
| 15cm LH2 | Yes | 2 x 2 mm2 | Delta scan ΔP=+2%; | ||||
| 15cm LH2 | Yes | 2 x 2 mm2 | Delta scan ΔP=+4%; |
- Step R3: Dummy Target Runs (with sieve slit)
| Run number | Target | Sieve | Raster | Ebeam [GeV] | P0 [GeV/c] | θe [deg] | Comment |
| 15cm dummy | Yes | 2 x 2 mm2 | +4% delta scan setting |
- Step R4: Proton Elastic Kinematics
| Run number | Target | Sieve | Raster | Ebeam [GeV] | P0 [GeV/c] | θe [deg] | Comment |
| Single-foil carbon | No | Off | |||||
| 15cm dummy | No | 2 x 2 mm2 | |||||
| 15cm LH2 | No | 2 x 2 mm2 |
Target Boiling Study
- H3 and He3 Target. Use C12 target as a normalization check for beam-current dependent rate check.
| Run number | Target | Beam Current | Raster Size | Ebeam [GeV] | P0 [GeV/c] | θe [deg] | Comment |
| H3 | 25uA | 2x2 cm | |||||
| H3 | 15uA | 2x2 cm | |||||
| H3 | 5uA | 2x2 cm |
| Run number | Target | Beam Current | Raster Size | Ebeam [GeV] | P0 [GeV/c] | θe [deg] | Comment |
| Carbon-Foil | 25uA | 2x2 cm | |||||
| Carbon-Foil | 15uA | 2x2 cm | |||||
| Carbon-Foil | 5uA | 2x2 cm |