Difference between revisions of "Run Group F"

From clas12-run
Jump to navigation Jump to search
 
(321 intermediate revisions by 10 users not shown)
Line 12: Line 12:
 
'''[https://accwiki.acc.jlab.org/pub/SWDocs/BeamTimeAccounting/Machine_Time_Accounting_User_Guide.pdf Beam Time Accounting User Guide]'''.
 
'''[https://accwiki.acc.jlab.org/pub/SWDocs/BeamTimeAccounting/Machine_Time_Accounting_User_Guide.pdf Beam Time Accounting User Guide]'''.
 
<!-- ===[https://clasweb.jlab.org/wiki/index.php/CLAS12_OPS_Doc#CLAS12_Operations_Documentation Operations Documentation]=== -->
 
<!-- ===[https://clasweb.jlab.org/wiki/index.php/CLAS12_OPS_Doc#CLAS12_Operations_Documentation Operations Documentation]=== -->
 +
===[https://www.jlab.org/Hall-B/run-web/rgf/ESAD_HallB-CLAS12_rgF.pdf ESAD], [https://www.jlab.org/Hall-B/run-web/rgf/COO_HallB-CLAS12_rgF.pdf COO], [https://www.jlab.org/Hall-B/run-web/rgf/RSAD_HallB-CLAS12_rgF.pdf RSAD], [https://www.jlab.org/div_dept/train/SAF111/Hall%20B%20worker%20Safety%20Training%20%28SAF111%29%20%2008%2001-12-1.pdf ERG] ===
 +
===[https://www.jlab.org/Hall-B/run-web/rgf/RTPC_OSP.pdf OSP for Radial Time Projection Chamber]===
 +
===[https://www.jlab.org/Hall-B/run-web/rgf/bonus12_gas_target_osp_97803.pdf OSP for BONUS12 gas target system]===
  
 
| valign=top |
 
| valign=top |
Line 23: Line 26:
 
* [https://clasweb.jlab.org/wiki/images/0/0f/Ctof_manual.pdf CTOF]
 
* [https://clasweb.jlab.org/wiki/images/0/0f/Ctof_manual.pdf CTOF]
 
* [https://clasweb.jlab.org/wiki/images/a/ab/Opman_master.pdf DAQ]
 
* [https://clasweb.jlab.org/wiki/images/a/ab/Opman_master.pdf DAQ]
* [https://clasweb.jlab.org/wiki/images/b/b2/Drift-chamber-operating-procedure.pdf DC]
+
* [[Media:Drift-chamber-operating-procedure.pdf|DC]]
 
* [https://clasweb.jlab.org/wiki/images/a/a2/Ec_manual.pdf ECAL]
 
* [https://clasweb.jlab.org/wiki/images/a/a2/Ec_manual.pdf ECAL]
 
* [https://clasweb.jlab.org/wiki/images/3/3b/FT-Manual.pdf FT]
 
* [https://clasweb.jlab.org/wiki/images/3/3b/FT-Manual.pdf FT]
Line 63: Line 66:
 
* Mar 18 - Mar 23: Carlos Ayerbe
 
* Mar 18 - Mar 23: Carlos Ayerbe
 
----
 
----
 +
* RC & RTPC expert list [https://docs.google.com/spreadsheets/d/1msHlnkpqnHTAgsMAMcI97RNbK919ljRSs9hNiTKnjY0/edit#gid=0]
 
* 07/31 - 08/04 : Narbe Kalantarian
 
* 07/31 - 08/04 : Narbe Kalantarian
* 09/05 - 08/11 : Stephen Bueltmann
+
* 08/05 - 08/11 : Stephen Bueltmann
 
* 08/12 - 08/18 : Carlos Ayerbe Gayoso
 
* 08/12 - 08/18 : Carlos Ayerbe Gayoso
 
* 08/20 - 08/21 : Mohammad Hattawy
 
* 08/20 - 08/21 : Mohammad Hattawy
Line 70: Line 74:
 
* 08/26 - 09/01 : Mohammad Hattawy
 
* 08/26 - 09/01 : Mohammad Hattawy
 
* 09/02 - 09/08 : Sebastian Kuhn
 
* 09/02 - 09/08 : Sebastian Kuhn
* 09/09 - 09/23 : Mohammad Hattawy
+
* 09/09 - 09/15 : Mohammad Hattawy
 +
* 09/16 - 09/21 : (Mohammad Hattawy)
  
  
 
[[Daily Run Group F Coordination Meetings]]
 
[[Daily Run Group F Coordination Meetings]]
 
</font>
 
</font>
Daily at 10:00 a.m. Bluejeans = 757 683 5804
+
Daily at 12:00 pm.  
 +
[https://bluejeans.com/7576835804 Bluejeans] = 757 683 5804
 +
 
 +
 
 +
'''Daily Ops Meeting (working days 7:45):'''<br>
 +
[https://bluejeans.com/569476853 BlueJeans] = 569 476 853
 +
 
 
|}
 
|}
  
Line 109: Line 120:
 
</center>
 
</center>
  
''' Important: Document all your work in the logbook! For every run, make comment at run start and run end (including "ignore" if warranted), enter RELEVANT screen shots *), and take about 20-30 min data with good beam, then post monitoring plots (reset if beam is bad and wait another 20-30 min). Also take screenshot of RTPC in CED at least once per run with beam'''<br>
+
''' Important: Document all your work in the logbook! For every run, make comment at run start and run end (including "ignore" if warranted), enter RELEVANT screen shots *), reset monitoring plots and accumulate monitoring data for about 10-20 min with good beam (on!), then post monitoring plots (reset if beam is bad and wait another 10-20 min). Also take screenshot of RTPC in CED at least once per run with beam'''<br>
  
 
   
 
   
== RC: Narbe Kalantarians==
+
== RC: Mohammad Hattawy ==
* 757-575-7540
+
 
 +
=== RC phone: ===
 +
* 757-575-7540  
 
* 9 757-575-7540 from Counting Room.
 
* 9 757-575-7540 from Counting Room.
 +
* If you can't reach the RC on the RC phone, use the personal phone numbers (Mohammad: (423) 596-8352, Sebastian: (757) 639-6640)
 +
* RC meeting held at 12 pm online.  Bluejeans 757 683 5804
 +
* Get the number of events from SQL --> [http://clasweb.jlab.org/rcdb RCDB]
  
* RC meeting held at 10am in 2nd Floor Counting House.  Bluejeans 757 683 5804
 
 
   
 
   
== PDL: Stepan Stepanyan / Dan Carman ==
+
== PDL: Stepan Stepanyan ==
 
*  (757) 876-1789  
 
*  (757) 876-1789  
 
* 9 876-1789 from Counting Room
 
* 9 876-1789 from Counting Room
  
 
== NEW SHIFT INFORMATION - PLEASE READ ==
 
== NEW SHIFT INFORMATION - PLEASE READ ==
Due to travel restrictions, only local people will be able to come to Jefferson Lab for their shifts. To deal with this situation, Jefferson Lab leadership has developed a new [https://userweb.jlab.org/~kuhn/BONuS12/Documents/shift-policy_20200317.docx POLICY] that requires only an expert shift taker during Day and Swing shifts (Owl shifts will still be covered by 2 people). There will be remote backup, at least partial presence by the Run Coordinators, and all counting houses have been equipped with a direct camera feed so that shift takers for ANY hall can monitor the counting houses of Hall B and Hall D when only 1 person is present. Shift Experts will carry a cell phone that can be used to call in help. IF YOU ARE ALONE ON SHIFT, you may not go into the Hall - call the relevant experts instead. Shift experts during Day and Swing are expected, in addition to their regular duties, to also check monitoring histograms and CED and log them (as well as standard screen shots) to the logbook, and to respond to any alarms, as well as fill out shift checklists. These new rules take effect on Tuesday, March 24.  
+
Due to travel restrictions, only local people will be able to come to Jefferson Lab for their shifts. To deal with this situation, Jefferson Lab leadership has developed a new [https://userweb.jlab.org/~kuhn/BONuS12/Documents/shift-policy_20200317.docx POLICY] that requires only an expert shift taker during Day and Swing shifts (Owl shifts will still be covered by 2 people). There will be remote backup ("Ghost Shifts") for some of the worker shifts during Day/Swing - '''please read the instructions under the "Remote Shifts" tab and make sure that Bluejeans is properly connected (Screen share and audio)'''. All counting houses have been equipped with a direct camera feed so that shift takers for ANY hall can monitor the counting houses of Hall B and Hall D when only 1 person is present. Shift Experts will carry a cell phone that can be used to call in help. IF YOU ARE ALONE ON SHIFT, you may not go into the Hall - call the relevant experts instead. Shift experts during Day and Swing are expected, in addition to their regular duties, to also check monitoring histograms and CED and log them (as well as standard screen shots) to the logbook, and to respond to any alarms, as well as fill out shift checklists. These new rules take effect on Tuesday, March 24.  
  
 
Starting immediately, please follow these rules: Keep a distance of 6 ft from all other people AT ALL TIMES. In particular, expert and worker (when both present) should sit 6 feet apart, facing in different directions. In addition, only the RC OR an RTPC expert  should be inside the counting house B at any time - a maximum room occupancy of THREE has to be obeyed at all times. The RC, PDL and shift expert have the authority to ask non-essential people to leave if overcrowding occurs. Any work that requires 2 people to work in closer proximity than 6' must be first approved.
 
Starting immediately, please follow these rules: Keep a distance of 6 ft from all other people AT ALL TIMES. In particular, expert and worker (when both present) should sit 6 feet apart, facing in different directions. In addition, only the RC OR an RTPC expert  should be inside the counting house B at any time - a maximum room occupancy of THREE has to be obeyed at all times. The RC, PDL and shift expert have the authority to ask non-essential people to leave if overcrowding occurs. Any work that requires 2 people to work in closer proximity than 6' must be first approved.
  
Until further notice, we expect the experimental run to continue until September 6, 2020. Obviously, this puts extra burden on many people, and we are grateful especially for those local volunteers who have signed up for shifts. Please also read the relevant information on COVID-19 and MEDCON5 operations at Jefferson Lab: [https://jlab.servicenowservices.com/cv19?id=cv19_index]
+
At present, we expect the experimental run to continue until '''September 21, 2020'''. Obviously, this puts extra burden on many people, and we are grateful especially for those local volunteers who have signed up for shifts.Please also read the relevant information on COVID-19 and MEDCON5 operations at Jefferson Lab: [https://jlab.servicenowservices.com/cv19?id=cv19_index]
 
 
== <font color=blue>''' Run Plan'''</font> (see also [https://userweb.jlab.org/~kuhn/BONuS12/Documents/RunPlan.pdf initial run plan]) ==
 
(Last updated: July 28th, 2020 )
 
  
===<font color=blue>''Requests''</font>===
+
==================================================================================================================================
#
 
#
 
  
===<font color=blue>'' For every run (~2 hours)''</font>===
 
# Submit screenshots for the DAQvnc (select "statistics" tab), CLAS12 VTP Trigger GUI, ROC Busies, Beamline overview, beam strip charts, RTPC overview, BONuS HV from clascss. Do this '''only''' while beam is on!
 
# Run clas12mon over '''at most''' 20-30 min '''with good beam(!)''' (reset first) and submit the occupancy plots (at least '''once''' per run, '''early in the run'''). Compare with previous monitoring plots and make a log entry about any changes you observe. Make sure to reset monitoring plots regularly.
 
# Take at least one screen shot of RTPC CED with beam per run and post in logbook. De-select "Auto-event" and use Cntrl-N to browse for an event with tracks in it.
 
 
  
 +
==<font color=red>'''A. Requests'''</font>==
  
 +
===<font color=blue>'' 1. Please end a run whenever the status of the 1/2 waveplate changes''</font>===
 +
MCC should announce any changes, but sometimes they won't do that. The Hall requesting the 1/2 waveplate change should contact us first with a time estimate - at that point, please watch the status of the 1/2 waveplate on the Beam Overview screen and stop the run as soon as it changes.
 +
===<font color=black>There will be an audible Beamline alarm when the half-wave plate (HWP) state changes. Please end the ongoing run and start a new run.</font>===
  
 +
===<font color=blue>'' 2. For every run (~15-20 M events)''</font>===
 +
# In the '''begin run dialog''', enter the requested '''beam current''', the '''state of the half-wave plate (IN or OUT)''' and any conditions changed since the last run (target, B-fields, HVs, DAQ config, trigger, ...). In the end run dialog, check boxes ("junk" etc.) and add to the dialog any significant changes during the run.
 +
# *) Near the beginning of the run, submit  the following screenshots (can be all in one elog entry) '''while beam is on'''. Sample plots for reference:
 +
## Beamline overview,
 +
##  DAQvnc (select "statistics" tab) - [https://logbooks.jlab.org/files/2020/08/3819334/clonpc15_20200802_082100.gif] (NOT the default window with all the green ROC terminals),
 +
## CLAS12 VTP Trigger GUI - [https://logbooks.jlab.org/files/2020/08/3819288/clonpc15_20200802_065630.gif] - '''NOT''' the Trigger Alarm GUI! -,
 +
## ROC Busies [https://logbooks.jlab.org/files/2020/08/3819288/clonpc15_20200802_065634.gif],
 +
## RTPC overview [https://logbooks.jlab.org/files/2020/08/3819288/clonpc15_20200802_065636.gif],
 +
## BONuS HV [https://logbooks.jlab.org/files/2020/08/3819288/clonpc15_20200802_065643.gif].
 +
# Run clas12mon over '''at most''' 10-20 min '''with good beam(!)''' (reset first) and submit the occupancy plots (at least '''once''' per run, '''early in the run'''). Whenever you restart clas12mon (and if you haven't checked it yet), '''go to the TriggerBits menu and select "ElectronOr"'''. Compare with previous monitoring plots and the '''[https://clas12mon.jlab.org/mon12/histograms/?reference=3826198 reference WITHOUT FT]''' and make a log entry about any changes you observe. '''Do NOT worry about trigger bits 22 and 31''' - those will be missing. Make sure to reset monitoring plots regularly.
 +
# Take at least one screen shot of RTPC CED with beam per run and post in logbook. De-select "Auto-event" and use Cntrl-N to browse for an event with tracks in it.
  
===<font color=blue>''A. ESTABLISH BEAM ''</font>===
+
====<font color=red>''If you change the current, make sure that...''</font>====
 +
#The total trigger rate remains below 2 kHz
 +
# The MVT1 and MVT2 ROCs stay below 5-6% busy
 +
# The deadtime stays below 10%
 +
# The DC occupancy for RI in all 6 sectors stays below 4% (detailed monitoring plots)
 +
# RTPC HV remains stable (no trips).<br/>
  
<b>DAQ config: ; Trigger file: rgf_v2.2_150MeV.trg </b> (same for inbending and outbending)
+
===<font color=blue>''3. Serious note about setting the trigger rates alarm limits''</font>===
# At the beginning of the shift:
+
When the data taking conditions are changing (going from one target to another, H2,D2,4He, empty, or changing the beam current or something else)
##Call Eugene (PDL: (757) 3033996) to start energizing the solenoid at full field (1935 A) and start energizing Torus at 1/2 maximum field (-1886.5 A) in out-bending polarity. Once the magnets at the requested fields, please sumbit screenshots to logbook. clascss->Soleoind/Torus->Magnet Power Supply. 
+
the shift has to adjust the trigger rates limits that wile be used during new data taking.
## In parallel to 1, call RTPC expert to set target to “empty” (= 1 atm H2).
+
The procedure is shown at the pictures:
# Restore beam to the hall, first to the tagger dump, following the procedures described in [https://wiki.jlab.org/clas12-run/images/e/e3/Estab_beam.pdf].
 
# Check beam quality using harp scans 2C21 and 2C24, following the procedures described in [https://wiki.jlab.org/clas12-run/images/9/9f/HarpScanManual.pdf]
 
# When the beam quality is acceptable, Call MCC and ask for a low-intensity (~5nA) beam to FC, Check the procedures below, complete harp scans ([[Media:HarpScanManual.pdf|Performing Harp Scans]]). We require less than 0.3 mm (1σ) beam widths in x and y (As measured by 2H01A harp) and halo below 10^−4 (As measured by 2H01A harp).
 
# Center beam on target, using rates in BOM and downstream beam monitors. Establish range where beam starts directly interacting with target walls and take middle.
 
# Engage orbit locks and ascertain that they are stable.
 
# Set alarms and interlocks.
 
# Call the MCC and tell them that the beam is good and must keep the beam current at 5 nA. 
 
# TURN HV ON for all the detectors.
 
  
 +
# Press MENU buttom at the trigger GUI
 +
# Choose  ALARMS SETTINGS - Expert
 +
# When the beam is stable press SET ALL NORMALIZED RATE LIMITS
 +
... You are done.
 +
Detailed procedures with pictures can be found here [https://logbooks.jlab.org/entry/3819963]
  
===<font color=blue>''B. CALIBRATION AND COMMISSIONING AT 1 PASS (2.2 GEV) ''</font>===
+
===<font color=blue>''4. PLEASE <font color=red> ''DO NOT IGNORE ANY ALARM ''</font> and follow the guidance for each alarm notification. ''</font>===
 +
'''Exception: Alarms on trigger bits > 14 can be ignored (or the alarm threshold set lower)'''
  
 +
============================================================================================================================================================
 +
== <font color=blue>'''B. Run Plan'''</font> (see also [https://userweb.jlab.org/~kuhn/BONuS12/Documents/RunPlan.pdf initial run plan]) ==
  
====<font color=blue>''I. Outbending Configuration, H2 target (about 1 day) ''</font>====
 
<b>DAQ config: PROD66; Trigger file: rgf_v2.2_150MeV.trg </b> (same for inbending and outbending)
 
# Call the BONuS12-RTPC expert (757-329-4844) to fill the target with H2 gas target (68 psig).
 
# Checking:<br>
 
## Solenoid at full field (1935 A).
 
## Torus at 1/2 maximum field (-1880 A) in out-bending polarity
 
# Call MCC and ask for 5 nA beam.
 
# Start DAQ and start taking data. Look at CED and monitoring plots to check occupancies.
 
# IF trigger rate is much less than 1kHz, we can increase the beam current (observe DC occupancies, BOM, downstream monitors) up to 50 nA in steps of 10 nA.
 
# Check the DAQ trigger rate, it must be less than 2kHz. If it is higher call MCC and reduce the beam current as needed.
 
# Submit the list of screenshots at the beginning and at the end of every run.
 
  
====<font color=blue>''II. Electron-Inbending Configuration, H2 targe (about 1 shift)''</font>====
+
* Collect 30M on H2
<b>DAQ config: ; Trigger file:rgf_v2.2_150MeV.trg </b> (same for inbending and outbending)
+
* Call Mohammad to set the target to empty
# Call Daniel Carmen (PDL: (757) 876-1789)  flip Torus polarity to 1/2 maximum field (+1880 A) in in-bending polarity [https://clasweb.jlab.org/wiki/images/d/d6/Hall_B_Torus_Power-Up_and_Power-Down_Procedure.pdf]
+
* continue taking data on empty target setting till 7:00AM on Monday, Sep 21st.
# Call the BONuS12-RTPC expert (757-329-4844) to purge the target and fill it with H2 gas target (70 psig) .
 
# Call MCC and ask for 50 nA beam.
 
# Start DAQ and start taking data.
 
# Submit the list of screenshots at the beginning and at the end of every run.  
 
  
====<font color=blue>''III. Electron-Inbending Configuration, D2 target (about 1 shift)''</font>====
+
<b>DAQ config:  PROD66 </b>
<b>DAQ config: ; Trigger file: rgf_v2.2_150MeV.trg </b>
+
<b>Trigger file: rgf_inbending_v4_2.trg (.cnf)</b>
# Call the BONuS12-RTPC expert (757-329-4844) to purge the target and fill it with D2 gas target (max is 68 psig) .
+
# Continue taking data with 270 nA beam current (@2C24). '''NOTE:''' This is 280 nA on the SLM, which means we have to ask MCC for 270 nA on 2C24 (which is what they see).
# Call MCC and ask for 50 nA beam.
 
# Start DAQ and start taking data.
 
# Check the DAQ trigger rate, it must be less than 2kHz. If it is higher call MCC and reduce the beam current as needed.  
 
# Submit the list of screenshots at the beginning and at the end of every run.
 
 
 
 
 
====<font color=blue>''Production: Electron-inbending Configuration, D2/H2/4He target @ 10.4 GeV beam ''</font>====
 
<b>DAQ config:PROD66; Trigger file:rgf_inbending_v3_4.trg </b>
 
 
 
# Make sure beam blocker is in front of Faraday Cup
 
# After a longer beam-off period (assuming no major retuning of the accelerator), no harp scans are necessary. However, follow these steps to bring beam back:
 
## Ask for 10 nA. Check that all BPMs are within 0.1 mm of their nominal values.
 
## Ask for 50 nA. Check BMPs again and ask for orbit locks to be activated.
 
## Once orbit locks are running, ask for 240 nA.
 
# Ask MCC for 240 nA beam current (NOTE that 2C21A BPM will show 260nA. This is a known issue.)
 
 
# <font color=red> Please write the target pressure and comments in the dialogue box when starting/stopping a run </font>
 
# <font color=red> Please write the target pressure and comments in the dialogue box when starting/stopping a run </font>
 
# Start a run and check that live time is above 85%. If not decrease current and log it.
 
# Start a run and check that live time is above 85%. If not decrease current and log it.
# Restart a new run every <font color=red> 2h </font> OR 10M events. '''END A RUN''' if beam will be off > 10 min, RTPC HV trip, or '''whenever half-wave plate is changed'''!
+
# Restart a new run every (15-20)M events (wait till beam trips). '''END A RUN''' if beam will be off > 20 min, RTPC HV trip, or '''whenever half-wave plate is changed'''!
# Keep BTA (beam time accounting) up to date, including reasons for any entries with experiment not ready
+
# Submit the list of screenshots + clas12mon +ced at the beginning and at after the first 10M events in every run.
# Submit the list of screenshots at the beginning and at the end of every run.  
+
# Keep BTA (beam time accounting) up to date, including reasons for any entries with experiment not ready.
 
 
 
 
 
 
 
# <b> When checking the ECAL response, make sure to look at the histograms for each sector by using the sector buttons at the bottom of the clas12mon window - if adcecal* or/and adcpcal* ROC crashes, there will be no alarm and the histograms are the way to notice this issue.  
 
# <b> When checking the ECAL response, make sure to look at the histograms for each sector by using the sector buttons at the bottom of the clas12mon window - if adcecal* or/and adcpcal* ROC crashes, there will be no alarm and the histograms are the way to notice this issue.  
 
#<font color=blue> For trigger alarms check Note 14 first! </font></b>
 
#<font color=blue> For trigger alarms check Note 14 first! </font></b>
  
 +
=== <b><font color=red>* At the end of each run, follow the standard DAQ restart sequence: <br></font></b>===
 +
# -> "end run", "cancel", "reset" <br>
 +
# a. if the run ended correctly: ->  '''"download", "prestart", "go"'''<br>
 +
# b. if the run did not end correctly or if any ROCs had to be rebooted:-> "configure", "download", "prestart", "go"<br>
  
====<font color=blue>''Beam Restoration (last updated Feb 19)''</font>====
+
=== Plan for Monday Morning, Sep 21st ===
<b> Updated Manual is at [https://wiki.jlab.org/clas12-run/images/e/e3/Estab_beam.pdf] </b>
+
# 07:00 : The beam will be taken away for some MCC studies. Gagik, will confirm with MCC that the Hall goes to Controlled Access.
<font color=green>
+
# 07:00 to 8:00: Gagik will call Eugene to ramp down the torus and ramp the solenoid to 1.5T.
 +
# 07:00- 08:00: Gagik can turn off HV on the following detectors ONLY (LTCC, HTCC, DC, RICH, FMT, FTC, FTH)
 +
# 08:00: Gagik leaves the counting house and the BONuS team (Jiwan and Sebastian) will join to do final cosmic tests.
 +
# Before 12:00: the solenoid be totally ramped down. the bonus team will be in contact with Eugene.
 +
# 12:00: The bonus team will turn off HV on ECAL, PCAL, and CND.
 +
# FTOF and CTOF must be left turned ON.  
 +
==================================================================================================================================
  
# <b>IF YOU GO DIRECTLY TO FARADAY CUP!!!</b>: Quick beam recovery procedure including Harp Scan
 
## All HV are off (including FTOF)
 
## Check that 20 mm collimator is in
 
## Call MCC to unmask U/M/D counters but keep BOM masked or get it masked in case it isn't
 
## Call MCC to put 5nA to the FC.
 
## Compare the 2c21, 2c24, 2H01 positions and beam overview screen to the reference below
 
## Put thresholds on U/M/D as 1M/1M/1M and dwell time 50 ms.
 
## follow the procedures for the harp scans at 2H01 [https://wiki.jlab.org/clas12-run/images/9/9f/HarpScanManual.pdf] (optionally at 2C21 and 2C24)
 
## Compare the results with the references scans below (be aware to use the correct analysis counter)
 
## if what you get is similar to the references, call MCC and tell them the the beam is acceptable and set FSD thresholds and dwelltimes as written below and continue with production running (see above)
 
## if what you get isn't similar to the references, do the other harp scans. If you are not sure if a tune of the beam is needed, consult beam line expert and/or RC.
 
  
</font>
+
== <font color=blue>'''C. References and Standards:'''</font>==
  
<b><font color=red> At the end of each run, follow the standard DAQ restart sequence ''' <br>
+
===* Establish beam in the Hall ( CALL RC )===
''(Note, this might be different from the instructions coming up on RunControl.)''
+
# ALL the detectors must be off. Don't forget the FT and RTPC HV (separate GUIs).
 +
# Ask MCC to energize the tagger magnet.
 +
# Ask MCC for 5-9 nA and check the beam quality using harp scans 2C21 and 2C24, following the procedures described in [https://wiki.jlab.org/clas12-run/images/e/e3/Estab_beam.pdf]
 +
# When the beam quality is acceptable, Call MCC and ask for a low-intensity (~5-9 nA) beam to FC, complete harp scans. Procedures described in [https://wiki.jlab.org/clas12-run/images/9/9f/HarpScanManual.pdf]. We require less than 0.3 mm (1σ) beam widths in x and y (As measured by 2H01A harp) and halo below 10^−4 (As measured by 2H01A harp). See references below.
 +
# ONLY if instructed by RC: -> Center beam on target, using rates in BOM and downstream beam monitors. Establish range where beam starts directly interacting with target walls and take middle.
 +
# Engage orbit locks and ascertain that they are stable.
 +
# Set alarms and interlocks.
 +
# Call the MCC and tell them that the beam is good and must keep the beam current at 5 nA.
  
* "end run", "cancel", "reset"
 
* if the run ended correctly:
 
**  '''"download", "prestart", "go"'''
 
* if the run did not end correctly or if any ROCs had to be rebooted:
 
** "configure", "download", "prestart", "go"
 
</font></b>
 
  
== <font color=blue>''' References and Standards:'''</font>==
+
<b> Default solenoid current and B field </b> 1800 A (~3.78 T)
''(last update Mar 21, 2020 @ 9:40 PM.)''
 
 
 
<b> Restoration of Beam to Hall B</b>
 
 
 
 
 
<b> Default solenoid current and B field </b> 1935 A (~4.0 T)
 
  
 
<b> Nominal Beam Positions </b>
 
<b> Nominal Beam Positions </b>
*2H01, X: -0.1 mm, Y: -0.4 mm
+
''(last update Sep 10th, 2020 @ 23:50 PM)''
*2C24, X: +0.1 mm, Y: -0.4 mm
+
*2H01, X: +0.7 mm, Y: -1.6 mm
*2C21, X: +0.1 mm, Y: 0.0 mm
+
*2C24, X: -2.0 mm, Y: -1.0 mm
* the acceptable trajectory for the beam before entering the hall must be established while on the tagger dump. The relation between the 2C24 BPM positrons and the X,Y values measured with the tagger harp are:
+
*2C21, X: -0.4 mm, Y: 0.3 mm
**X_harp=36.68-X_2C24
 
**Y_harp=20.97-Y_2C24
 
  
  
<b> FSD Thresholds </b>'''TEMPORARY UNTIL BOM REPARATIONS'''
+
<b> FSD Thresholds </b>
* Upstream: 2000 Hz
+
* Upstream: 2,600 Hz
* Midstream: 2000 Hz
+
* Midstream: 2,000 Hz
* Downstream: 20000 Hz
+
* Downstream: 500,000 Hz
* BOM: 100000
+
* BOM: 7,000 Hz
  
<b> FSD Dwell time </b>
+
<b> FSD Dwell (Integration) Time </b>
 
* Upstream: 5 ms
 
* Upstream: 5 ms
 
* Midstream: 5 ms
 
* Midstream: 5 ms
Line 273: Line 257:
 
<b> BONuS HV setting</b>
 
<b> BONuS HV setting</b>
 
* [https://logbooks.jlab.org/entry/3807043 Reference RTPC currents without beam]
 
* [https://logbooks.jlab.org/entry/3807043 Reference RTPC currents without beam]
* [https://logbooks.jlab.org/entry/3807062 Final reference RTPC HV and currents with beam]
+
* [https://logbooks.jlab.org/files/2020/08/3838353/clonpc15_20200831_082242.gif Final reference RTPC HV and currents with beam (240 nA)]
  
<b> Reference Harp Scans for Beam on Tagger Dump: </b> 2C21 [https://logbooks.jlab.org/entry/3791951], 2C24 [https://logbooks.jlab.org/entry/3791964]
+
*<b> Reference Harp Scans for Beam on Tagger Dump: </b> 2C21 [https://logbooks.jlab.org/entry/3825429], 2C24 [https://logbooks.jlab.org/entry/3838463]
 
+
*<b> Reference Harp Scans for Beam on Faraday Cup: </b> 2C21 [https://logbooks.jlab.org/entry/3825493], 2C24 [https://logbooks.jlab.org/entry/3837237][https://logbooks.jlab.org/entry/3837238], 2H01 [https://logbooks.jlab.org/entry/3837231].
<b> Reference Harp Scans for Beam on Faraday Cup: </b> 2H01 [https://logbooks.jlab.org/entry/3786885], [https://logbooks.jlab.org/entry/3787469], 2C21 [https://logbooks.jlab.org/entry/3786867], 2C24 [https://logbooks.jlab.org/entry/3786872]
 
  
 
<b> Reference Monitoring Histograms</b> 5 nA production trigger [https://logbooks.jlab.org/entry/3783929]
 
<b> Reference Monitoring Histograms</b> 5 nA production trigger [https://logbooks.jlab.org/entry/3783929]
Line 287: Line 270:
 
* Well-tuned beam on Tagger Dump at 5 nA during harp scans: [https://logbooks.jlab.org/entry/3791966]  
 
* Well-tuned beam on Tagger Dump at 5 nA during harp scans: [https://logbooks.jlab.org/entry/3791966]  
  
==<font color=blue>''' General Instructions''':</font>==
+
 
 +
==================================================================================================================================
 +
 
 +
 
 +
==<font color=blue>''' D. Beam Restoration after major retuning'''</font>==
 +
<b> Updated Manual is at [https://wiki.jlab.org/clas12-run/images/e/e3/Estab_beam.pdf] </b>
 +
<font color=green>
 +
 
 +
 
 +
 
 +
</font>
 +
 
 +
==================================================================================================================================
 +
 
 +
==<font color=blue>'''F. General Instructions''':</font>==
 
   
 
   
  
 
* The main lights in the Hall (dome lights) and the Forward Carriage lights are being kept off because of light leaks affecting some of the detectors. If these lights are switched on during an access, they should be switched off when leaving the Hall. Note that the dome lights when switched off cannot be turned back on immediately because they require 10-15 min to cooldown.
 
* The main lights in the Hall (dome lights) and the Forward Carriage lights are being kept off because of light leaks affecting some of the detectors. If these lights are switched on during an access, they should be switched off when leaving the Hall. Note that the dome lights when switched off cannot be turned back on immediately because they require 10-15 min to cooldown.
 
* <font color=blue> Get familiar with the shift crew responsibilities for the RTPC (see manual [https://wiki.jlab.org/clas12-run/images/d/dc/RTPC_Operations_Manual%284%29.pdf]). Especially on how to switch on the HV after a trip. </font>
 
* <font color=blue> Get familiar with the shift crew responsibilities for the RTPC (see manual [https://wiki.jlab.org/clas12-run/images/d/dc/RTPC_Operations_Manual%284%29.pdf]). Especially on how to switch on the HV after a trip. </font>
* Do not run more than 30 minutes above 30 nA with 5-pass beam without the beam blocker in front of Faraday cup. Put beam blocker in for long running at high currents for 5 pass operations.
+
* Do not run more than 30 minutes above 30 nA with 5-pass beam without the beam blocker in front of Faraday cup. Put beam blocker in for long running at high currents for 5 pass operations
 
* Turn DC HV off only for beam tuning; if no beam is available or when beam is stable, keep them on even if you are not taking data.
 
* Turn DC HV off only for beam tuning; if no beam is available or when beam is stable, keep them on even if you are not taking data.
 
* With any issue contact On-Call Experts or RC - do not spend more than 15-20 min trying to fix the problem.
 
* With any issue contact On-Call Experts or RC - do not spend more than 15-20 min trying to fix the problem.
Line 334: Line 331:
 
*'''Note 6: Reset CLAS12MON frequently to avoid histogram saturation. If CLAS12MON is restarted change MAX scale to 10 (default is 5) for DC normalized occupncy histograms. This would prevent them from saturation. See log entry [https://logbooks.jlab.org/entry/3667416]'''
 
*'''Note 6: Reset CLAS12MON frequently to avoid histogram saturation. If CLAS12MON is restarted change MAX scale to 10 (default is 5) for DC normalized occupncy histograms. This would prevent them from saturation. See log entry [https://logbooks.jlab.org/entry/3667416]'''
  
*'''Note 7: Shift workers must check the occupancies! Use this tool to compare to previous runs: [https://clas12mon.jlab.org/mon12/histograms/?reference=3650729]'''
+
*'''Note 7: Shift workers must check the occupancies! Here is the standard sets of monitoring histograms [https://clas12mon.jlab.org/mon12/histograms/?reference=3826198 WITHOUT the FT]. Between August 13 and August 18 7 a.m., please use  [https://clas12mon.jlab.org/mon12/histograms/?reference=3826733 THIS link for the proper reference WITH FT].
<!--[https://clas12mon.jlab.org/mon12/histograms/?reference=3621580]'''-->
 
  
 
*'''Note 8: Check the vacuum periodically, make sure vacuum is not higher than 5e-5 '''
 
*'''Note 8: Check the vacuum periodically, make sure vacuum is not higher than 5e-5 '''
Line 416: Line 412:
 
* [http://clasweb.jlab.org/rcdb RCDB]
 
* [http://clasweb.jlab.org/rcdb RCDB]
  
===Run lists===
 
 
| valign=top |
 
| valign=top |
 
===Accelerator===
 
===Accelerator===
Line 424: Line 419:
 
* [https://www.evernote.com/pub/maureeungaro/pdldaily Accelerator daily meetings notes (by Mauri)]
 
* [https://www.evernote.com/pub/maureeungaro/pdldaily Accelerator daily meetings notes (by Mauri)]
 
| valign=top |
 
| valign=top |
===Bluejeans meetings===
+
 
* [https://bluejeans.com/7576835804 Daily Run meetings] 10:00 a.m. Upstairs Counting House / Bluejeans 757 683 5804
 
 
|}
 
|}
  
 
= Remote Shifts =
 
= Remote Shifts =
 +
[https://jeffersonlab-my.sharepoint.com/:x:/g/personal/baltzell_jlab_org/Ea4w15MIDeRDp5C9fRWE31gBwCftmDQu5KTh1cV6pxbcMQ?e=vx5RlI Remote Shift Schedule and Signup]
 
=== Bluejeans ===
 
=== Bluejeans ===
* Permanent connection for communication, and screen sharing between remote and local shift workers.
+
* Permanent connection for communication and screen sharing between remote and local shift workers.
 
* [https://bluejeans.com/950041022 https://bluejeans.com/950041022]
 
* [https://bluejeans.com/950041022 https://bluejeans.com/950041022]
 
* Or, on a clonpc## as user=clasrun, in a terminal run "<tt>bluejeans</tt>"
 
* Or, on a clonpc## as user=clasrun, in a terminal run "<tt>bluejeans</tt>"
 +
* For audio in the counting house, for now we can use one of the rarely-used phones.
 
=== WebOPI ===
 
=== WebOPI ===
 
* Requires CUE login
 
* Requires CUE login
 
* [https://hallbopi.jlab.org/webopi3.3/w?opi=beamline/clas12-web.opi Beamline Overview]
 
* [https://hallbopi.jlab.org/webopi3.3/w?opi=beamline/clas12-web.opi Beamline Overview]
 +
* [https://hallbopi.jlab.org/webopi3.3/w?opi=https://hallbopi.jlab.org/opis/detectors/BONUS/bonus.opi BONuS RTPC Overview]
 
=== Strip Charts ===
 
=== Strip Charts ===
 
* Requires CUE login
 
* Requires CUE login
* [https://epicsweb.jlab.org/wave/?myaDeployment=ops&myaLimit=100000&windowMinutes=30&title=Upstream+and+Midstream+Halo+Counters&fullscreen=false&layoutMode=2&viewerMode=2&pv=scaler_cS3b&pv=scaler_cS4b&scaler_cS3blabel=scaler_cS3b&scaler_cS3bcolor=%23a6cee3&scaler_cS3byAxisLabel=Rate++%28Hz%29&scaler_cS3byAxisMin=&scaler_cS3byAxisMax=&scaler_cS3byAxisLog&scaler_cS3bscaler=&pv=scaler_cS5b&pv=scaler_cS6b&pv=scaler_cS7b&pv=scaler_cS12b&pv=scaler_cS13b&pv=scaler_cS14b&pv=scaler_cS15b Upstream/Midstream Halo Counters]
+
<!--* [https://epicsweb.jlab.org/wave/?myaDeployment=ops&myaLimit=100000&windowMinutes=30&title=Upstream+and+Midstream+Halo+Counters&fullscreen=false&layoutMode=2&viewerMode=2&pv=scaler_cS3b&pv=scaler_cS4b&scaler_cS3blabel=scaler_cS3b&scaler_cS3bcolor=%23a6cee3&scaler_cS3byAxisLabel=Rate++%28Hz%29&scaler_cS3byAxisMin=&scaler_cS3byAxisMax=&scaler_cS3byAxisLog&scaler_cS3bscaler=&pv=scaler_cS5b&pv=scaler_cS6b&pv=scaler_cS7b&pv=scaler_cS12b&pv=scaler_cS13b&pv=scaler_cS14b&pv=scaler_cS15b Upstream/Midstream Halo Counters]-->
 +
* [https://epicsweb.jlab.org/wave/?myaDeployment=ops&myaLimit=100000&windowMinutes=30&title=Upstream+and+Midstream+Halo+Counters&fullscreen=false&layoutMode=2&viewerMode=2&pv=scaler_cS3b&pv=scaler_cS4b&pv=scaler_cS6b&pv=scaler_cS12b&pv=scaler_cS13b&pv=scaler_cS14b&pv=scaler_cS15b&scaler_cS3blabel=scaler_cS3b&scaler_cS3bcolor=%23a6cee3&scaler_cS3byAxisLabel=Rate++%28Hz%29&scaler_cS3byAxisMin=&scaler_cS3byAxisMax=&scaler_cS3byAxisLog&scaler_cS3bscaler=&start=2020-08-08+09%3A02%3A36&end=2020-08-08+09%3A07%3A36&scaler_cS4blabel=scaler_cS4b&scaler_cS4bcolor=%231f78b4&scaler_cS4byAxisLabel=&scaler_cS4byAxisMin=&scaler_cS4byAxisMax=&scaler_cS4byAxisLog=&scaler_cS4bscaler=&scaler_cS5byAxisLabel=&scaler_cS5byAxisMin=&scaler_cS5byAxisMax=&scaler_cS5byAxisLog=&scaler_cS5bscaler=&scaler_cS6blabel=scaler_cS6b&scaler_cS6bcolor=%2333a02c&scaler_cS6byAxisLabel=&scaler_cS6byAxisMin=&scaler_cS6byAxisMax=&scaler_cS6byAxisLog=&scaler_cS6bscaler=&scaler_cS7byAxisLabel=&scaler_cS7byAxisMin=&scaler_cS7byAxisMax=&scaler_cS7byAxisLog=&scaler_cS7bscaler=&scaler_cS12blabel=scaler_cS12b&scaler_cS12bcolor=%23e31a1c&scaler_cS12byAxisLabel=&scaler_cS12byAxisMin=&scaler_cS12byAxisMax=&scaler_cS12byAxisLog=&scaler_cS12bscaler=&scaler_cS13blabel=scaler_cS13b&scaler_cS13bcolor=%23fdbf6f&scaler_cS13byAxisLabel=&scaler_cS13byAxisMin=&scaler_cS13byAxisMax=&scaler_cS13byAxisLog=&scaler_cS13bscaler=&scaler_cS14blabel=scaler_cS14b&scaler_cS14bcolor=%23ff7f00&scaler_cS14byAxisLabel=&scaler_cS14byAxisMin=&scaler_cS14byAxisMax=&scaler_cS14byAxisLog=&scaler_cS14bscaler=&scaler_cS15blabel=scaler_cS15b&scaler_cS15bcolor=%23cab2d6&scaler_cS15byAxisLabel=&scaler_cS15byAxisMin=&scaler_cS15byAxisMax=&scaler_cS15byAxisLog=&scaler_cS15bscaler= Upstream/Midstream Halo Counters]
 
* [https://epicsweb.jlab.org/wave/?myaDeployment=ops&myaLimit=100000&windowMinutes=30&title=Downstream+Halo+Counters&fullscreen=false&layoutMode=2&viewerMode=2&pv=scalerS8b&pv=scalerS9b&scalerS8blabel=scalerS8b&scalerS8bcolor=%23a6cee3&scalerS8byAxisLabel=Rate++%28Hz%29&scalerS8byAxisMin=&scalerS8byAxisMax=&scalerS8byAxisLog&scalerS8bscaler=&pv=scalerS10b&pv=scalerS11b&scalerS9blabel=scalerS9b&scalerS9bcolor=%231f78b4&scalerS9byAxisLabel=&scalerS9byAxisMin=&scalerS9byAxisMax=&scalerS9byAxisLog=&scalerS9bscaler=&scalerS10blabel=scalerS10b&scalerS10bcolor=%23b2df8a&scalerS10byAxisLabel=&scalerS10byAxisMin=&scalerS10byAxisMax=&scalerS10byAxisLog=&scalerS10bscaler=&scalerS11blabel=scalerS11b&scalerS11bcolor=%2333a02c&scalerS11byAxisLabel=&scalerS11byAxisMin=&scalerS11byAxisMax=&scalerS11byAxisLog=&scalerS11bscaler= Downstream Halo Counters]
 
* [https://epicsweb.jlab.org/wave/?myaDeployment=ops&myaLimit=100000&windowMinutes=30&title=Downstream+Halo+Counters&fullscreen=false&layoutMode=2&viewerMode=2&pv=scalerS8b&pv=scalerS9b&scalerS8blabel=scalerS8b&scalerS8bcolor=%23a6cee3&scalerS8byAxisLabel=Rate++%28Hz%29&scalerS8byAxisMin=&scalerS8byAxisMax=&scalerS8byAxisLog&scalerS8bscaler=&pv=scalerS10b&pv=scalerS11b&scalerS9blabel=scalerS9b&scalerS9bcolor=%231f78b4&scalerS9byAxisLabel=&scalerS9byAxisMin=&scalerS9byAxisMax=&scalerS9byAxisLog=&scalerS9bscaler=&scalerS10blabel=scalerS10b&scalerS10bcolor=%23b2df8a&scalerS10byAxisLabel=&scalerS10byAxisMin=&scalerS10byAxisMax=&scalerS10byAxisLog=&scalerS10bscaler=&scalerS11blabel=scalerS11b&scalerS11bcolor=%2333a02c&scalerS11byAxisLabel=&scalerS11byAxisMin=&scalerS11byAxisMax=&scalerS11byAxisLog=&scalerS11bscaler= Downstream Halo Counters]
* [https://epicsweb.jlab.org/wave/?start=2020-07-08+16%3A50%3A02&end=2020-07-08+16%3A55%3A02&myaDeployment=ops&myaLimit=100000&windowMinutes=30&title=Beam+Currents&fullscreen=false&layoutMode=2&viewerMode=2&pv=IPM2C21A&pv=IPM2C24A&pv=scaler_calc1b&IPM2C21Alabel=IPM2C21A&IPM2C21Acolor=%23a6cee3&IPM2C21AyAxisLabel=Beam+Current+%28nA%29&IPM2C21AyAxisMin=0&IPM2C21AyAxisMax=150&IPM2C21AyAxisLog&IPM2C21Ascaler=&scaler_calc1blabel=Faraday+Cup&scaler_calc1bcolor=%23b2df8a&scaler_calc1byAxisLabel=&scaler_calc1byAxisMin=&scaler_calc1byAxisMax=&scaler_calc1byAxisLog&scaler_calc1bscaler= Beam Currents]
+
* [https://epicsweb.jlab.org/wave/?start=2020-07-08+16%3A50%3A02&end=2020-07-08+16%3A55%3A02&myaDeployment=ops&myaLimit=100000&windowMinutes=30&title=Beam+Currents&fullscreen=false&layoutMode=2&viewerMode=2&pv=IPM2C21A&pv=IPM2C24A&pv=scaler_calc1b&IPM2C21Alabel=IPM2C21A&IPM2C21Acolor=%23a6cee3&IPM2C21AyAxisLabel=Beam+Current+%28nA%29&IPM2C21AyAxisMin=0&IPM2C21AyAxisMax=300&IPM2C21AyAxisLog&IPM2C21Ascaler=&scaler_calc1blabel=Faraday+Cup&scaler_calc1bcolor=%23b2df8a&scaler_calc1byAxisLabel=&scaler_calc1byAxisMin=&scaler_calc1byAxisMax=&scaler_calc1byAxisLog&scaler_calc1bscaler= Beam Currents]
 +
* [https://epicsweb.jlab.org/wave/?start=2020-08-03+12%3A30%3A57&end=2020-08-03+12%3A35%3A57&myaDeployment=ops&myaLimit=100000&windowMinutes=30&title=BPM+Positions+%28Y-Axis+is+mean+%2B%2F-+0.5+mm%29&fullscreen=false&layoutMode=3&viewerMode=2&pv=IPM2C24A.XPOS&pv=IPM2C24A.YPOS&pv=IPM2H01.XPOS&pv=IPM2H01.YPOS&IPM2C24A.XPOSlabel=IPM2C24A.XPOS&IPM2C24A.XPOScolor=%23e31a1c&IPM2C24A.XPOSyAxisLabel=&IPM2C24A.XPOSyAxisMin=-2.0&IPM2C24A.XPOSyAxisMax=+1.0&IPM2C24A.XPOSyAxisLog&IPM2C24A.XPOSscaler=&IPM2C24A.YPOSlabel=IPM2C24A.YPOS&IPM2C24A.YPOScolor=pink&IPM2C24A.YPOSyAxisLabel=&IPM2C24A.YPOSyAxisMin=-2.0&IPM2C24A.YPOSyAxisMax=1.0&IPM2C24A.YPOSyAxisLog&IPM2C24A.YPOSscaler=&IPM2H01.XPOSlabel=IPM2H01.XPOS&IPM2H01.XPOScolor=darkgreen&IPM2H01.XPOSyAxisLabel=&IPM2H01.XPOSyAxisMin=-2.0&IPM2H01.XPOSyAxisMax=1.0&IPM2H01.XPOSyAxisLog&IPM2H01.XPOSscaler=&IPM2H01.YPOSlabel=IPM2H01.YPOS&IPM2H01.YPOScolor=lightgreen&IPM2H01.YPOSyAxisLabel=&IPM2H01.YPOSyAxisMin=-2.0&IPM2H01.YPOSyAxisMax=1.0&IPM2H01.YPOSyAxisLog&IPM2H01.YPOSscaler=#a6cee3&IPM2C24A.XPOSyAxisLabel=2C24+X+(mm)&IPM2C24A.XPOSyAxisMin=-1.5&IPM2C24A.XPOSyAxisMax=-0.5&IPM2C24A.XPOSyAxisLog&IPM2C24A.XPOSscaler=&IPM2C24A.YPOSlabel=IPM2C24A.YPOS&IPM2C24A.YPOScolor=%231f78b4&IPM2C24A.YPOSyAxisLabel=2C24+Y+(mm)&IPM2C24A.YPOSyAxisMin=0.3&IPM2C24A.YPOSyAxisMax=1.3&IPM2C24A.YPOSyAxisLog&IPM2C24A.YPOSscaler=&IPM2H01.XPOSlabel=IPM2H01.XPOS&IPM2H01.XPOScolor=pink&IPM2H01.XPOSyAxisLabel=2H01+X+(mm)&IPM2H01.XPOSyAxisMin=-0.6&IPM2H01.XPOSyAxisMax=0.4&IPM2H01.XPOSyAxisLog&IPM2H01.XPOSscaler=&IPM2H01.YPOSlabel=IPM2H01.YPOS&IPM2H01.YPOScolor=darkred&IPM2H01.YPOSyAxisLabel=2H01+Y+(mm)&IPM2H01.YPOSyAxisMin=0.4&IPM2H01.YPOSyAxisMax=1.4&IPM2H01.YPOSyAxisLog&IPM2H01.YPOSscaler= BPM Positions]
 +
** Note: All BPM axes now go from -2.0 to +1.0 mm
 
* [https://epicsweb.jlab.org/wave empty]
 
* [https://epicsweb.jlab.org/wave empty]
 
=== Monitoring Histograms ===
 
=== Monitoring Histograms ===
* Reference run/logentry requires updating by Run Coordinator
+
* Changing the reference run/logentry requires updating the URL by the Run Coordinator
* [https://clas12mon.jlab.org/mon12/histograms/?reference=3630375 Reference, Current, and 5 Most Recent]
+
* [https://clas12mon.jlab.org/mon12/histograms/?reference=3826198 Reference, current, and 5 most recent runs] for runs WITHOUT the FT.
 +
* For runs WITH the FT (August 13 - August 18 7 a.m), please use the following link: [https://clas12mon.jlab.org/mon12/histograms/ FT ON]
  
 +
=== For Shift Expert ===
 +
* Bluejeans is running on clonpc14 - DO NOT CLOSE THE SESSION
 +
* The bluejeans session should always share the screen, it is the lower monitor of clonpc14. The alarm handler must be displayed on that monitor to allow remote shifter to keep eye on it.
 +
* Audio for the bluejeans session goes through the phone, 269-5247. This is the phone attached on the second row of tables (former RC station), behind the shift expert station.
 +
** DO NOT HANG UP or MUTE the phone, if you have to mute then do not forget to unmute. 
 +
** CHECK AT THE BEGINNING OF EACH SHIFT: About every 6 hours the bluejeans will disconnect the phone if this happens, use the microphone tab in the bluejeans window and choose "Switch to phone audio" then select "Call me" and give the phone number, 757 269 5247. Once you are connected, you have to press "'''*4'''" on the phone to unmute yourself.
  
 
<headertabs/>
 
<headertabs/>

Latest revision as of 13:49, 25 July 2024

[edit]

Shift Schedule

Shift Checklist

Hot Checkout

Beam Time Accounting

  • See guidance for BTA in

Beam Time Accounting User Guide.

ESAD, COO, RSAD, ERG

OSP for Radial Time Projection Chamber

OSP for BONUS12 gas target system

Manuals

Procedures

JLab Logbooks


RC schedule Weekly form

  • Feb 12 - Feb 18: Mohammad Hattawy
  • Feb 19 - Feb 25: Florian Hauenstein
  • Feb 26 - Mar 3: Eric Christy
  • Mar 4 - Mar 19: Sebastian Kuhn
  • Mar 18 - Mar 23: Carlos Ayerbe

  • RC & RTPC expert list [1]
  • 07/31 - 08/04 : Narbe Kalantarian
  • 08/05 - 08/11 : Stephen Bueltmann
  • 08/12 - 08/18 : Carlos Ayerbe Gayoso
  • 08/20 - 08/21 : Mohammad Hattawy
  • 08/22 - 08/25 : Sebastian Kuhn
  • 08/26 - 09/01 : Mohammad Hattawy
  • 09/02 - 09/08 : Sebastian Kuhn
  • 09/09 - 09/15 : Mohammad Hattawy
  • 09/16 - 09/21 : (Mohammad Hattawy)


Daily Run Group F Coordination Meetings Daily at 12:00 pm. Bluejeans = 757 683 5804


Daily Ops Meeting (working days 7:45):
BlueJeans = 569 476 853


Clas12design.png