Difference between revisions of "Magnet"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | == Sweeper assembly == | + | == Sweeper assembly and Preparation Plan == |
| − | * [https://wiki.jlab.org/cuawiki/images/e/ec/67508-00002_S1_R-_SWEEPER_ASSY.pdf Sweeping magnet assembly] | + | * [https://wiki.jlab.org/cuawiki/images/e/ec/67508-00002_S1_R-_SWEEPER_ASSY.pdf Sweeping magnet assembly view] |
| + | * [https://wiki.jlab.org/cuawiki/images/2/23/Preparation_plan.txt Draft of the magnet preparation plan/Field mapping concept] | ||
== Main Coil == | == Main Coil == | ||
| − | * [https://wiki.jlab.org/cuawiki/images/e/e8/67508-00003_S1-2_R-A_COIL_ASSY-NPS_SWEEPER_MAGNET.pdf | + | * [https://wiki.jlab.org/cuawiki/images/e/e8/67508-00003_S1-2_R-A_COIL_ASSY-NPS_SWEEPER_MAGNET.pdf Production drawings] |
* [https://wiki.jlab.org/cuawiki/images/6/60/SAM_main_coil_specifications.pdf Specifications] | * [https://wiki.jlab.org/cuawiki/images/6/60/SAM_main_coil_specifications.pdf Specifications] | ||
| + | * [https://wiki.jlab.org/cuawiki/index.php/File:Main_coil_concept.jpg Winding Concept] | ||
== Corrector Coil == | == Corrector Coil == | ||
| − | * [https://wiki.jlab.org/cuawiki/images/a/a3/67508-00005_S1-2_R-A_CORRECTOR_COIL_ASSY-NPS_SWEEPER_MAGNET.pdf | + | * [https://wiki.jlab.org/cuawiki/images/a/a3/67508-00005_S1-2_R-A_CORRECTOR_COIL_ASSY-NPS_SWEEPER_MAGNET.pdf Production Drawings] |
* [https://wiki.jlab.org/cuawiki/images/e/e2/SAM_corr_coil_specifications.pdf Specifications] | * [https://wiki.jlab.org/cuawiki/images/e/e2/SAM_corr_coil_specifications.pdf Specifications] | ||
== Yoke == | == Yoke == | ||
| − | * [https://wiki.jlab.org/cuawiki/images/0/01/67508-00004_S1-11_R-B_YOKE_ASSY-NPS_SWEEPER_MAGNET.pdf | + | * [https://wiki.jlab.org/cuawiki/images/0/01/67508-00004_S1-11_R-B_YOKE_ASSY-NPS_SWEEPER_MAGNET.pdf Production Drawings] |
* [https://wiki.jlab.org/cuawiki/images/8/83/SAM_yoke_specifications.pdf Specifications] | * [https://wiki.jlab.org/cuawiki/images/8/83/SAM_yoke_specifications.pdf Specifications] | ||
| + | |||
| + | |||
| + | == Field calculcations == | ||
| + | |||
| + | * [https://wiki.jlab.org/cuawiki/images/3/36/SAM_model_coordinates.png top view of the TOSCA model (along Y)] | ||
| + | |||
| + | * [https://wiki.jlab.org/cuawiki/images/5/5b/SAM_6.3deg.png top view for beam line] | ||
| + | |||
| + | * [https://wiki.jlab.org/cuawiki/images/f/fb/Field_beam_6.3deg.png field on the beam line for 6.3 degree NPS position] | ||
| + | |||
| + | * [https://wiki.jlab.org/cuawiki/images/0/0a/Field_gap_6.3deg.png field in the main gap for 6.3 degree NPS position] | ||
Revision as of 19:02, 12 April 2017
Sweeper assembly and Preparation Plan
Main Coil
Corrector Coil
Yoke
Field calculcations
Other Updates
- README instructions for using the code (Gabi)
- Compared to the original version slide #14 has been corrected: The beam deflection angle is much smaller than was shown before and also added a comment about the downstream shielding of the beam line. The original version from 30 July 2015 can be found here
- The coordinate system is based on the magnet, so the target center has the coordinates x = 15 cm, y = 0 cm, z = 157 cm. The beam going to the negative z, positive x at the angle -2.2 degree. The center of the calorimeter is in the direction +4.1 degree from the target.