Difference between revisions of "Cables"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
* [https://wiki.jlab.org/cuawiki/images/e/ec/ComCal_with_5_pin_connector.PDF Voltage divider schematics ] | * [https://wiki.jlab.org/cuawiki/images/e/ec/ComCal_with_5_pin_connector.PDF Voltage divider schematics ] | ||
| − | * The connector on the voltage divider is [https://www.samtec.com/products/ipl1-105-01-l-s-ra-k Samtec Part # IPL1-105-01-L-S-RA-K]: | + | * The 5-pin connector on the voltage divider is [https://www.samtec.com/products/ipl1-105-01-l-s-ra-k Samtec Part # IPL1-105-01-L-S-RA-K] (male): |
[[File:Example.jpg|300px|NPS Voltage divider]] [[File:End_View.JPG|300px|NPS Voltage divider]] | [[File:Example.jpg|300px|NPS Voltage divider]] [[File:End_View.JPG|300px|NPS Voltage divider]] | ||
* Pictures of the assembly: | * Pictures of the assembly: | ||
| Line 9: | Line 9: | ||
== Custom cable from voltage divider to PCB boards == | == Custom cable from voltage divider to PCB boards == | ||
| − | The cable has a SAMTEC connector [https://www.samtec.com/products/ipd1-05-s-k IPD1-05-S-K] on one side. On the other side the cable has a [https://int.rsdelivers.com/product/rs-pro/r19-003-03-0332110ll/rs-pro-straight-50%cf%89-cable-mount-coaxial-connector/5463210 SMA RS PRO 546-3210] connector ([https://wiki.jlab.org/cuawiki/images/0/07/SMA_546_3210.pdf Datasheet], [https://wiki.jlab.org/cuawiki/images/f/fe/SMA_D%C3%A9nudage.pdf Crimp instructions]) and [https://www.fischerconnectors.com/sites/default/files/specifications/tech_specs_full_1.7_oct17.pdf Fischer connector S 102 A 018]. The cable length is 375 mm. | + | The cable has a female SAMTEC 5-pin connector [https://www.samtec.com/products/ipd1-05-s-k IPD1-05-S-K] on one side, with 4 crimp contacts [https://www.samtec.com/products/cc79l-2630-01-l CC79L-2630-01-L]. On the other side the cable has a [https://int.rsdelivers.com/product/rs-pro/r19-003-03-0332110ll/rs-pro-straight-50%cf%89-cable-mount-coaxial-connector/5463210 SMA RS PRO 546-3210] connector ([https://wiki.jlab.org/cuawiki/images/0/07/SMA_546_3210.pdf Datasheet], [https://wiki.jlab.org/cuawiki/images/f/fe/SMA_D%C3%A9nudage.pdf Crimp instructions]) and [https://www.fischerconnectors.com/sites/default/files/specifications/tech_specs_full_1.7_oct17.pdf Fischer connector S 102 A 018]. Both the HV and the anode cables are KX3A type and 3-mm external diameter. The cable length is 375 mm. |
* [https://wiki.jlab.org/cuawiki/images/c/c7/C%C3%A2blage_Embase_Interface_%281%29.pdf Cable schematics] | * [https://wiki.jlab.org/cuawiki/images/c/c7/C%C3%A2blage_Embase_Interface_%281%29.pdf Cable schematics] | ||
* Picture of the cable: | * Picture of the cable: | ||
| Line 17: | Line 17: | ||
The HV and the anode signals of each column of the detector is routed through a PCB board. This boards also holds one LED per channel. | The HV and the anode signals of each column of the detector is routed through a PCB board. This boards also holds one LED per channel. | ||
| + | |||
| + | * Each HV cable is plugges into a [https://www.fischerconnectors.com/sites/default/files/specifications/tech_specs_full_1.7_oct17.pdf Fischer D 102 A018 connector] on the PCB board | ||
| + | * The anode cable is plugged into a [https://www.digikey.com/product-detail/en/cinch-connectivity-solutions-johnson/142-0701-501/J569-ND/241109 SMA CINCH CONNECTIVITY 142-0701-501] | ||
| + | * The anode signal gets out at the opposite side of the board throught an identical connector [https://www.digikey.com/product-detail/en/cinch-connectivity-solutions-johnson/142-0701-501/J569-ND/241109 SMA CINCH CONNECTIVITY 142-0701-501] | ||
| + | * The HV enters through [https://wiki.jlab.org/cuawiki/images/c/ca/SAMTEC-pmsdx-xx-xxxx-x-xx.xx-x-xxx-mkt.pdf 2 connecteurs SAMTEC PMSD-15-206-K-D-LUS and 1 PMSD-08-206-K-D-LUS] connectors | ||
| + | * The LED sitting in front of each PMT are controlled by a ribbon cable plugged at the bottom of the board to male 2x36-pin SAMTEC connector [https://www.samtec.com/products/tst-136-01-l-d TST-136-01-L-D] | ||
| + | * Board schematics: [https://wiki.jlab.org/cuawiki/images/7/77/Sch%C3%A9ma_Carte_Interface.pdf 1], [https://wiki.jlab.org/cuawiki/images/2/28/Carte_Interface-1.pdf 2] | ||
[[File:GoWTJr.png|400px]] | [[File:GoWTJr.png|400px]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
== HV ribbon cables == | == HV ribbon cables == | ||
| + | |||
[[File: HV.jpg|600px]] | [[File: HV.jpg|600px]] | ||
| + | |||
| + | |||
| + | The PCB and the HV panel are connected by 20 AWG cables. Three cables per detector column: 2 cables have SAMTEC PMSD-15-206-K-15.40-D-LUS connectors and 1 cable has PMSD-08-206-K-15.40-D-LUS connectors | ||
| + | |||
| + | Notice that 20 AWG = 7.2 A, and our currents are of the order of micro-Amps. | ||
== LED control cables == | == LED control cables == | ||
| Line 32: | Line 41: | ||
== Anode signal cables == | == Anode signal cables == | ||
| + | * Signal come out at the back of the PCB boards. | ||
| + | * There are KX3 cables with a SMA connector [https://int.rsdelivers.com/product/rs-pro/r19-003-03-0332110ll/rs-pro-straight-50%cf%89-cable-mount-coaxial-connector/5463210 RS PRO 546-3210] on one side and a panel-mount [https://www.lemo.com/pdf/PES.00.250.NTME31.pdf LEMO PES.00.250.NTME31]. | ||
| + | * The length of each cable depends on the row of the detector (longer cables for channels at the bottom). | ||
| + | * The LEMO connectors are mounted at the top of the NPS box (see [https://wiki.jlab.org/cuawiki/index.php?title=Cables&action=submit#Signal_panel_.28LEMO.29 LEMO panel] below) | ||
| + | |||
== Patch panels at the top of the NPS box == | == Patch panels at the top of the NPS box == | ||
| Line 42: | Line 56: | ||
The HV panel has [https://wiki.jlab.org/cuawiki/images/c/ca/SAMTEC-pmsdx-xx-xxxx-x-xx.xx-x-xxx-mkt.pdf 2 SAMTEC connectors PMSD-15-206-K-D-LUS and 1 SAMTEC connector PMSD-08-206-K-D-LUS] per detector column (a total of 30 columns). | The HV panel has [https://wiki.jlab.org/cuawiki/images/c/ca/SAMTEC-pmsdx-xx-xxxx-x-xx.xx-x-xxx-mkt.pdf 2 SAMTEC connectors PMSD-15-206-K-D-LUS and 1 SAMTEC connector PMSD-08-206-K-D-LUS] per detector column (a total of 30 columns). | ||
| + | |||
| + | The board is made of two 15-pin SAMTEC IPBT-115-H1-T-D-K and one 8-pin SAMTEC IPBT-108-H1-T-D-K for each detector column (associated with one PCB board) | ||
| + | |||
| + | Elle est composé de 2 connecteurs 15 points droit SAMTEC réf. IPBT-115-H1-T-D-K | ||
| + | et d’un connecteur 8 points droit SAMTEC réf. IPBT-108-H1-T-D-K pour une carte interface. | ||
| + | |||
| + | La liaison entre les 2 cartes se fait par un câble en fil Gauge 20 via les 2 connecteurs SAMTEC réf. | ||
| + | PMSD-15-206-K-15.40-D-LUS et 1 connecteur réf. PMSD-08-206-K-15.40-D-LUS | ||
| + | |||
=== LED panel === | === LED panel === | ||
Revision as of 07:48, 25 August 2020
Voltage divider
- Voltage divider schematics
- The 5-pin connector on the voltage divider is Samtec Part # IPL1-105-01-L-S-RA-K (male):
- Pictures of the assembly:
Custom cable from voltage divider to PCB boards
The cable has a female SAMTEC 5-pin connector IPD1-05-S-K on one side, with 4 crimp contacts CC79L-2630-01-L. On the other side the cable has a SMA RS PRO 546-3210 connector (Datasheet, Crimp instructions) and Fischer connector S 102 A 018. Both the HV and the anode cables are KX3A type and 3-mm external diameter. The cable length is 375 mm.
- Cable schematics
- Picture of the cable:
PCB boards (one per detector column)
The HV and the anode signals of each column of the detector is routed through a PCB board. This boards also holds one LED per channel.
- Each HV cable is plugges into a Fischer D 102 A018 connector on the PCB board
- The anode cable is plugged into a SMA CINCH CONNECTIVITY 142-0701-501
- The anode signal gets out at the opposite side of the board throught an identical connector SMA CINCH CONNECTIVITY 142-0701-501
- The HV enters through 2 connecteurs SAMTEC PMSD-15-206-K-D-LUS and 1 PMSD-08-206-K-D-LUS connectors
- The LED sitting in front of each PMT are controlled by a ribbon cable plugged at the bottom of the board to male 2x36-pin SAMTEC connector TST-136-01-L-D
- Board schematics: 1, 2
HV ribbon cables
The PCB and the HV panel are connected by 20 AWG cables. Three cables per detector column: 2 cables have SAMTEC PMSD-15-206-K-15.40-D-LUS connectors and 1 cable has PMSD-08-206-K-15.40-D-LUS connectors
Notice that 20 AWG = 7.2 A, and our currents are of the order of micro-Amps.
LED control cables
Ribbon cables with SAMTEC connectors HCSD-36-D-86.60-01-N-G
Anode signal cables
- Signal come out at the back of the PCB boards.
- There are KX3 cables with a SMA connector RS PRO 546-3210 on one side and a panel-mount LEMO PES.00.250.NTME31.
- The length of each cable depends on the row of the detector (longer cables for channels at the bottom).
- The LEMO connectors are mounted at the top of the NPS box (see LEMO panel below)
Patch panels at the top of the NPS box
There are 3 panels of the top of the NPS box:
Signal panel (LEMO)
HV panel
The HV panel has 2 SAMTEC connectors PMSD-15-206-K-D-LUS and 1 SAMTEC connector PMSD-08-206-K-D-LUS per detector column (a total of 30 columns).
The board is made of two 15-pin SAMTEC IPBT-115-H1-T-D-K and one 8-pin SAMTEC IPBT-108-H1-T-D-K for each detector column (associated with one PCB board)
Elle est composé de 2 connecteurs 15 points droit SAMTEC réf. IPBT-115-H1-T-D-K et d’un connecteur 8 points droit SAMTEC réf. IPBT-108-H1-T-D-K pour une carte interface.
La liaison entre les 2 cartes se fait par un câble en fil Gauge 20 via les 2 connecteurs SAMTEC réf. PMSD-15-206-K-15.40-D-LUS et 1 connecteur réf. PMSD-08-206-K-15.40-D-LUS