Difference between revisions of "Phase 1"

Revision as of 18:51, 11 March 2021

200 kV gun - Cathode, anode and high voltage system

200 kV NEG Coated BPM's - New BPM's on beam pipe, NEG coated and absolutely mapped

Y-chamber Laser Window - Evaluating the best window to minimize birefringence under stress

DR dipole (15 deg) - New 15 deg air core bend dipole replaces pre-existing DS dipole

FX beamline and FY chopper solenoids - New double-coil sw/cw capable solenoids with 38 mm (FX) and 46 mm (FY) ID

PSS Kicker (upgraded for 200 kV upgrade) - New PSS kicker of reliable design to operate at 200 kV with shorter throw

WF Wien Filters (200 kV upgrade) - Upgraded Wien filters with 20 A magnetic coils and >18 kV electrodes to rotate spin of 200 keV electrons

QW Wien quadrupoles (200 kV upgrade) - New quads designed for 200 keV energy, w/ improved magnetic field quality

Chopping System (200 kV upgrade) - Choppers get higher power amplifiers, maybe a new chopping chamber

Pre-buncher cavity (200 kV upgrade) - Existing stainless steel pre-buncher replaced by copper cavity for higher power.

NEG coated 2.5 inch OD BPM's - Replacing (2) existing with (3) new BPM's, provide (x,x',y,y') from gun, help tuning

HD steering coils - New steering coils for the A1/A2 aperture cubes, improved design and for 200 keV energy

A1/A2 Aperture Steering Cubes - Reinvented A1/A2 apertures define beam size and PSS kicker destination, include upgraded HD steering coils

Injector upgrade vacuum improvements - Improvements in the vacuum design, use of getter and ion pumps

Open, complete, re-scheduled statuses updated 3/5/21

Open Install Ion Pump HV cables and mount Junction boxes on cable trays NL and INJ]
Open PSS Injector Interface Chassis removal
Open PSS Injector Segment PLC Upgrade
Open PSS CAMAC Relay cards replacement with VME versions for Injector and BSY
Open I&C Injector Camac to Vme and camera upgrade
Open I&C Upgrade harps to PC104
Open I&C Upgrade existing ItoV System with ItoV VME cards
Open I&C Accelerator network re-survey
Open FAC Tunnel Fire Alarm and Suppression Replacement
Open Apply labels to I&C components during 2020 SAD
Open Neutron Detector System Installation (SAD 2020)
Open UHV Power Supply Replacement (ISB)
Open Trim Utility Chassis Upgrade - All CEBAF Trim Racks
Open SAD 2020: P.M. of 24V Vacuum Power Supply Chassis
Open VME crate upgrade to IOCIN3
Open Remove old Sonitrol system hardware from NA and SA
Open Shutdown of Panel I-BT in the Injector
Open Insertable CAMAC to VME EPICS Controls upgrade Injector (iocin1->iocin1b)
Open Software Controls PSS Injector and North Linac changes on iocsoftsafe2
Open Perform Basic PM of 45 MeV spectrometer Power Supply
Open 2020 SAD and Beyond CAMAC / VME PM maintenance and repairs
Open iocin1 - VME crate replacement

Rescheduled Injector (prebuncher, buncher and choppers)- LLRF systems upgrade to 3.0 version

@@ Line 51: / Line 51: @@
 ;CIS SAD Tasks
-* '''Open''' [http://devweb.acc.jlab.org/CSUEApps/atlis/atlis.php?load=Task&task_id=20383 Injector Macropulse/Tune Mode Generator Modification]
 * '''Open''' [http://opsweb.acc.jlab.org/CSUEApps/atlis/task/19463 New Gun2 loading chamber]
 * '''Open''' [http://devweb.acc.jlab.org/CSUEApps/atlis/task/21920 CEBAF Lead Bricks : Collect, Sort, Clean, Paint, Store]
 * Placeholder for Tim Minga to test laser room smoke detector alarm to MCC/Guard
 * '''Open''' No ATLis [https://logbooks.jlab.org/entry/3844689 Fix IHWP readback during SAD]
+* '''Complete''' [http://devweb.acc.jlab.org/CSUEApps/atlis/atlis.php?load=Task&task_id=20383 Injector Macropulse/Tune Mode Generator Modification]