UITF Procedures not managed via document control
Jump to navigation
Jump to search
- trench shielding photos Media:trench shielding photos.xls
- krypton and vacuum high voltage processing
- photogun bakeout
- QE scanning the photocathode media:how to perform a QE scan.docx
- turn ON/OFF the photogun high voltage
- 15 degree dipole magnet interlock media:the sense circuit for 15 degree dipole magnet that provides gun HV permission.docx
- tune mode generator alignment procedure media:tune mode generator alignment procedure.pdf
- pockel cell alignment procedure
- maximizing the power delivered to the laser hutch inside UITF enclosure
UITF Buncher Phase & Gradient Setup
- using the harmonically resonant cavity
- using the 200 keV spectrometer
- using the Yao cavity, time-of-flight method
- overall description
- overview of the sweep procedure for UITF, including pre-sweep steps
- UHV ion pumps, setting the trip limit
- how to get it
- Locking out the gun and high power RF
- Locking out the valve upstream of the booster
Start Up and Shutdown Procedures
waste water irradiation-related
- Rowgowski-coil beam position monitor media:Kevin's proposed test plan for evaluating the Rogowski coil bpm.docx
- Putting beam on the "golden orbit" media: golden orbit procedure.docx